Polycom 8002 manual =Fr caller ID Rsme Mute End

Using the SIP Handset

If you want to…	Then…
Place a call on hold	Press the Hold softkey.
	When a call is placed on hold, an equal character (=) replaces the asterisk
	(*) and the Rsme softkey replaces the Hold softkey. Press Rsme to return to
	the call.
	Example:
		1
		Line 1 [your dial number]
		=Fr: [caller ID]
		Rsme		Mute	End
Mute/Unmute a call	Press the Mute softkey. When the handset is muted, an x character replaces
	the asterisk (*). Press the Mute softkey again to restore audio pickup.
Silence the ring	Press the END key to silence the loud ring and convert it to in-ear ringing.
	Loud ringing will resume when the next incoming call is received while the
	handset is in standby mode.
Answer a call on a	If another call comes in on a different line, the called line icon flashes and a
second line	tone sounds in the audio stream. In this example, a call is coming in on line
	2 and the line 2 icon is flashing.
	Example:
		1	2
		Line 1 [your dial number]
		*Fr: [caller ID]
		Hold		Mute	End
	1 To view the caller ID of the incoming call without interrupting the active
	call, press LINE + [the line number]. The display now shows information
	about the incoming call and you will continue hearing audio on the first
	call.
	Example:
		1	2
		Line 2 [your dial number]
			Fr: [caller ID]
		Answ		Rej
	2 Press Answ or START to answer the incoming call and place the active
	call on the other line on hold. Pressing the Rej softkey will redirect the
	incoming call to voicemail or as otherwise programmed.

PN: 1725-36034-001_C.doc 67