Polycom 8002 manual Line 1 your dial number To dialed number Hold Rej Mute

						Using the SIP Handset
If you want to…	Then…
Place a call	1	Press the START key and wait for a dial tone.
	2	Dial the numbers and press START. Listen for the ring to indicate the
		alerting of the called party.
	Note: Line 1 is the default line
	Example:
		1
			Line 1 [your dial number]
			*To: [dialed number]
			Hold	Rej	Mute
Place a second call on	Only outgoing calls are permitted as the second call on a given line. If there
the same line	is an incoming call to the number assigned to the line, the caller will get a
	busy tone and be routed to voicemail or to the second appearance of that
	call number, if defined.
	1	To access the second call dial tone, press LINE + [the line number].
	2	Dial the number for the second call.
	3	Press START to place the call.
	4	When a second call is active on the same line appearance, the second
		call appears below the first on the handset display.
	5	Use LINE + [the line number] to toggle between calls. The selected call
		is in bold type the other call is faded.
	Example:
	The following example shows an active incoming call as call one on line 1
	(Fr or From) and an outgoing call on hold as call two on line 1 (To). The
	bold text on row 4 indicates that call one is the currently selected call and
	that any softkeys or menu functions will apply to call one. The asterisk (*) on
	row 4 indicates that audio is currently flowing for call one.
			1
			Line 1 [your dial number]
			*Fr: [caller ID of caller]
			=To: [number you dialed]
			Hold	Mute	End
Place a call on a	1	Press START and listen for dial tone and then press LINE.
different line		or to predial the number just press the LINE key.
	2	Navigate to desired line and press Select.
	3	Dial the number.
	4	Press the Dial softkey or START to initiate the call.

PN: 1725-36034-001_C.doc 65