3
Gas tube installation
-It is important to have the connections performed by an authorized mechanic in order to be sure that the installation corresponds to the current rules and guidelines of the country where the ironer will be installed.
-The gas supply pipe must be fitted with a stop valve, which is easily to reach.
-The ironer must be connected to the type of gas, which is stated on the apparatus. The inlet gas pressure must correspond to the specification on the type plate, as well.
-Using a gas pipe that is too small can lead to insufficient gas supply, which results in a poor heating and a poor ironing result.
WARNING
Test all clutches and connections for possible leaks by means of a soap solution. NEVER by means of a flame.
Gas supply DN16 (1/2" BSP)
-The customer must install a filter and a manual stop valve on the supply side of the machine.
-Gas installation and connection must be done by qualified personnel only.
21