Alliance Laundry Systems CI 1650/325 Safety advice, Maintenance scheme, Daily maintenance

Page 56

7

Maintenance

Safety advice

When starting the maintenance work on the ironer, the following should be observed:

1.Turn off the gas tap in case of a gas-heating ironer.

2.Ensure that the ironer has cooled down until it has reached the environmental temperature.

3.Use proper tools in order to avoid damage to the machine, which can result in personal injury.

Maintenance scheme

The cleaning and maintenance intervals mentioned below are based on a use of 8 hours a day and 5 days a week. If the use of this machine differs, the intervals given below can be adjusted linearly.

Daily maintenance

Cleaning:

Surrounding area

Daily clean the surrounding area of the machine. Keep it free from dust as much as possible. A clean workroom will prolong the life of the machine as less dust and dirt will be drawn in the machine.

Filter for gas-heated ironer

Gas-heated ironers are equipped with an air filter. This filter is located in the right-hand door of the machine. Clean it manually or with a vacuum cleaner after the machine has been turned off.

WARNING

Maintenance on the machine is solely reserved for the maintenance personnel.

56

Image 56

Contents Part No. D1273 SeptemberPage Contents Safety Information Explanation of Safety MessagesPage Safety notice Important Safety Instructions Page Product description Intended useDescription of structural components Workplaces and noise level Technical data CI1650/325, CI2050/325 1650/325 2050/325Sound level measurement Warranty and service instructions Initial setup of the machine Transport and machine fasteningSetting up the machine 30 cmPage Page Page 16A Page Basic checks Ventilation of the roomAir filters Exhaust gasesOperation Operating devices and their positionStarting the machine Set the iron temperature FunctionsSet the ironing speed PedalReturn button not with guiding ribbons EndingFailure and information signals Page Page Page Machine function, adjustment and troubleshooting Description of machine functionsGeneral description of machine function Feeding sheets and towelsOperating the foot pedal option Setting the temperature AdviceSetting the speed Manual drive Adjustments of the machine Guiding ironing beltsTightening the drive chain Tightening the ironing belts Tightening the feeding belts Adjusting the gap between input table and main roll Fault Condition Possible cause TroubleshootingFault Cause Remedy After reset Fault Condition SolutionTemperature control Description of the control systemGeneral description of the control system Electric heating controlStart/stop function Control of exhaust ventilatorSpeed control Control panel and function keys Menu structure and how to enter Manual versionMenu structure Manu adjusting menu Coin adjusting menu Add XX default C1M coin 1 MediumC1H coin 1 High C2L coin 2 lowTechnical menu Kp Xxxx default gas 300 default elec Kd Xxxx default gas 1000 default elecKi Xxxx default gas 0.5 default elec Start PWM defaultREv Y/n default YES not adjustable with coin TMPDisplay menu Central panelSigma explorer DiSPMaintenance Safety adviceMaintenance scheme Daily maintenanceWeekly maintenance Monthly maintenancePage Page Half-yearly maintenance Feeding belts Ironer belts DriveScrapers