6
"Manu" adjusting menu
This is the group of parameters for the manual ironer with start button action.
+
+
-
+
-
+
-
+
-
+
-
+
-
Manu
Press the return button to continue.
t °C or t °F [default: °C]
Change, if necessary, by means of the + button and then press the return button.
XX Cool [default: 80°C]
This cool down temperature can be adjusted between 80 and 100°C by pressing the + or - button.
Then press the return button.
Iron
The following settings determine the 2 temperatures in between which it will be possible to set the temperature during operation.
XXX Low [default: 130°C]
This is the low limit temperature.
It can be changed by pressing the + or - button.
Then press the return button.
XXX High [default: 175°C]
This is the high limit temperature.
It can be changed by pressing the + or - button.
Then press the return button.
SP.L X.X [default: 1,4 m/min]
This is the low limit of the speed.
It can be changed by pressing the + or - button.
Then press the return button.
SP.H X.X [default: 6 m/min]
This is the high limit of the speed.
It can be changed by pressing the + or - button.
Then press the return button.
A.St X.X [default: 0.0]
In order to avoid that the ironer remains unused at temperature for a long time, it is possible to enter a switch off time.
In case of “0.0”, the cycle must be stopped manually. Then press the return button.
X X X
End
Press the return button to confirm the setting of this parameter group.
49