Alliance Laundry Systems CI 2050/325, CI 1650/325 instruction manual Contents

Page 3

Contents

1	Safety Information	4
	Explanation of Safety Messages	4
	Safety notice	6
	Important Safety Instructions	7
2	Product description	9
	Intended use	9
	Description of structural components	10
	Workplaces and noise level	11
	Technical data CI1650/325, CI2050/325	12
	Warranty and service instructions	14
3	Initial setup of the machine	15
	Transport and machine fastening	15
	Setting up the machine	16
	Basic checks	22
4	Operation	24
	Operating devices and their position	24
	Starting the machine	25
	Functions	26
	Failure and information signals	28
5	Machine function, adjustment and troubleshooting	32
	Description of machine functions	32
	Adjustments of the machine	37
	Troubleshooting	42
6	Description of the control system	44
	General description of the control system	44
	Control panel and function keys	46
	Menu structure and how to enter	47
	"Manu" adjusting menu	49
	"Coin" adjusting menu	50
	Technical menu	52
	Display menu	55
	Central panel	55
	Sigma explorer	55
7	Maintenance	56
	Safety advice	56
	Maintenance scheme	56

Contents

Image 3

Contents September Part No. D1273Page Contents Explanation of Safety Messages Safety InformationPage Safety notice Important Safety Instructions Page Intended use Product descriptionDescription of structural components Workplaces and noise level 1650/325 2050/325 Technical data CI1650/325, CI2050/325Sound level measurement Warranty and service instructions Transport and machine fastening Initial setup of the machine30 cm Setting up the machinePage Page Page 16A Page Ventilation of the room Basic checksExhaust gases Air filtersOperating devices and their position OperationStarting the machine Pedal Set the iron temperatureFunctions Set the ironing speedEnding Return button not with guiding ribbonsFailure and information signals Page Page Page Feeding sheets and towels Machine function, adjustment and troubleshootingDescription of machine functions General description of machine functionOperating the foot pedal option Advice Setting the temperatureSetting the speed Manual drive Guiding ironing belts Adjustments of the machineTightening the drive chain Tightening the ironing belts Tightening the feeding belts Adjusting the gap between input table and main roll Troubleshooting Fault Cause RemedyFault Condition Possible cause Fault Condition Solution After resetElectric heating control Temperature controlDescription of the control system General description of the control systemControl of exhaust ventilator Speed controlStart/stop function Control panel and function keys Manual version Menu structure and how to enterMenu structure Manu adjusting menu Coin adjusting menu C2L coin 2 low Add XX defaultC1M coin 1 Medium C1H coin 1 HighTechnical menu Start PWM default Kp Xxxx default gas 300 default elecKd Xxxx default gas 1000 default elec Ki Xxxx default gas 0.5 default elecTMP REv Y/n default YES not adjustable with coinDiSP Display menuCentral panel Sigma explorerDaily maintenance MaintenanceSafety advice Maintenance schemeMonthly maintenance Weekly maintenancePage Page Half-yearly maintenance Feeding belts Drive Ironer beltsScrapers