Alliance Laundry Systems CI 1650/325 Functions, Set the iron temperature, Set the ironing speed

Page 26

4

Functions

Set the iron temperature

The left display shows the previous setting of the temperature in a blinking mode when the - button is pressed.

Now the setting is changeable by pushing the - or + button. Once the setting is done, press the return button to confirm.

Set the ironing speed

The right display shows the previous setting of the speed in a blinking mode when the + button is pressed.

Now the setting is changeable by pushing the + or - button. Once the setting is done, press the return button to confirm.

Pedal

The pedal can be used to spread out the linen.

The feeding and ironing belts stop turning while this pedal is being stepped on and the display will show during 30 seconds:

WARNING

Do not use this pedal more and longer than necessary to avoid damage of the linen by overheating. The machine gives an acoustical signal after some seconds to warn.

Finger protection panel

For safety reasons, the feeding and ironing belts stop turning if the finger protection panel is pushed backwards. The buzzer is activated and on the display will appear:

Important

This panel may also be pushed back due to accumulation or multiple folding of linen, as a result of which the machine also stops and the same warning is coming on the display. Take the linen away and reset the emergency circuit and start the machine again.

26

Image 26

Contents Part No. D1273 SeptemberPage Contents Safety Information Explanation of Safety MessagesPage Safety notice Important Safety Instructions Page Product description Intended useDescription of structural components Workplaces and noise level Technical data CI1650/325, CI2050/325 1650/325 2050/325Sound level measurement Warranty and service instructions Initial setup of the machine Transport and machine fasteningSetting up the machine 30 cmPage Page Page 16A Page Basic checks Ventilation of the roomAir filters Exhaust gasesOperation Operating devices and their positionStarting the machine Set the ironing speed Set the iron temperatureFunctions PedalReturn button not with guiding ribbons EndingFailure and information signals Page Page Page General description of machine function Machine function, adjustment and troubleshootingDescription of machine functions Feeding sheets and towelsOperating the foot pedal option Setting the temperature AdviceSetting the speed Manual drive Adjustments of the machine Guiding ironing beltsTightening the drive chain Tightening the ironing belts Tightening the feeding belts Adjusting the gap between input table and main roll Fault Condition Possible cause TroubleshootingFault Cause Remedy After reset Fault Condition SolutionGeneral description of the control system Temperature controlDescription of the control system Electric heating controlStart/stop function Control of exhaust ventilatorSpeed control Control panel and function keys Menu structure and how to enter Manual versionMenu structure Manu adjusting menu Coin adjusting menu C1H coin 1 High Add XX defaultC1M coin 1 Medium C2L coin 2 lowTechnical menu Ki Xxxx default gas 0.5 default elec Kp Xxxx default gas 300 default elecKd Xxxx default gas 1000 default elec Start PWM defaultREv Y/n default YES not adjustable with coin TMPSigma explorer Display menuCentral panel DiSPMaintenance scheme MaintenanceSafety advice Daily maintenanceWeekly maintenance Monthly maintenancePage Page Half-yearly maintenance Feeding belts Ironer belts DriveScrapers