Alliance Laundry Systems CI 1650/325, CI 2050/325 Basic checks, Ventilation of the room

Page 22

3

Basic checks

Important

The first start-up of the machine should only be performed by an authorized service engineer or a distributor.

In special cases, it may be allowed that the first start-up is performed by the customer, but only after thorough instruction.

WARNING

If the first start-up is performed on one's own initiative, this may cause damage to persons, things, or environment.

-Check if all safety guards with interlocking device are closed, and that all emergency stop devices have been deactivated.

-Start the machine.

All machines have been tested and adjusted from the factory. However, factors such as temperatures, moisture of the atmosphere etc. may imply that an adjustment is necessary at the set-up place.

Ventilation of the room

The machine is fitted with a ventilator. This ventilator ensures vaporized moisture, and with a gas- heated ironer the flue gases, being exhausted.

It is important that the room, in which the ironer has been installed, is sufficiently ventilated. You have to take the universal rules for laundry environments into account together with the fact that the ironer exhausts 350 m³/h. It is also important that sufficient fresh air can enter the room.

Check this before you start the machine!

22

Image 22

Contents Part No. D1273 SeptemberPage Contents Safety Information Explanation of Safety MessagesPage Safety notice Important Safety Instructions Page Product description Intended useDescription of structural components Workplaces and noise level Technical data CI1650/325, CI2050/325 1650/325 2050/325Sound level measurement Warranty and service instructions Initial setup of the machine Transport and machine fasteningSetting up the machine 30 cmPage Page Page 16A Page Basic checks Ventilation of the roomAir filters Exhaust gasesOperation Operating devices and their positionStarting the machine Set the ironing speed Set the iron temperatureFunctions PedalReturn button not with guiding ribbons EndingFailure and information signals Page Page Page General description of machine function Machine function, adjustment and troubleshootingDescription of machine functions Feeding sheets and towelsOperating the foot pedal option Setting the temperature AdviceSetting the speed Manual drive Adjustments of the machine Guiding ironing beltsTightening the drive chain Tightening the ironing belts Tightening the feeding belts Adjusting the gap between input table and main roll Fault Cause Remedy TroubleshootingFault Condition Possible cause After reset Fault Condition SolutionGeneral description of the control system Temperature controlDescription of the control system Electric heating controlSpeed control Control of exhaust ventilatorStart/stop function Control panel and function keys Menu structure and how to enter Manual versionMenu structure Manu adjusting menu Coin adjusting menu C1H coin 1 High Add XX defaultC1M coin 1 Medium C2L coin 2 lowTechnical menu Ki Xxxx default gas 0.5 default elec Kp Xxxx default gas 300 default elecKd Xxxx default gas 1000 default elec Start PWM defaultREv Y/n default YES not adjustable with coin TMPSigma explorer Display menuCentral panel DiSPMaintenance scheme MaintenanceSafety advice Daily maintenanceWeekly maintenance Monthly maintenancePage Page Half-yearly maintenance Feeding belts Ironer belts DriveScrapers