Bushnell 111026 instruction manual Using the Operational Modes

Using the Operational Modes

Mode	Icon	Settings	Description
Line Frequency	60 or 50	60 Hz, 50 Hz	Set to match the AC power frequency (cycles) of
			your country. This ensures that stills and videos shot
			under fluorescent lighting appear normal.
Continuous	CT	OFF, 3, 5	Select 3 or 5 frames to shoot a rapid series of photos
			instead of a single frame when SNAP is pressed
			(in normal still photo mode). To cancel, enter this
			mode again and select OFF.
Memory Access	MEM	Sto (USB Mass	Select "Sto" to access the internal or card memory
		Storage), PC (USB	when the camera is connected to a computer with
		Camera)	the USB cable. "PC" allows the camera to be
			used as a live USB/PC camera (note that the 8x
			magnification and lack of close focus capability
			limits usefulness in most size rooms)
Delete Last	LSt+Trash	None-press SNAP	Select this mode and press SNAP to delete only the
	Can	to delete the last	last photo or video you took. The counter will go
		photo or video	down one number.

10