NordicTrack NTL11920 Problem The walking belt slows when walked on, Power Cord, Move the key

Page 27

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.

b. If the walking belt is overtightened, treadmill perfor-

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep

the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3”–4”

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department, toll- free.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION:

a. If the walking belt is off-center, remove the key and

UN-

 

PLUG THE POWER CORD

. If the walking belt has

 

shifted to the left,

use the allen wrench to turn the left

 

rear roller bolt clockwise 1/2 of a turn;

if the walking belt

 

has shifted to the right,

turn the left rear roller bolt coun-

 

terclockwise 1/2 of a turn. Be careful not to overtighten the

 

walking belt. Plug in the power cord, insert the key, and

 

run the treadmill for a few minutes. Repeat until the walk-

 

ing belt is centered.

 

 

b. If the walking belt slips when walked on, first remove the

key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn.

When the walking belt is correctly tightened, you should

be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and care- fully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:

a. With the key in the console, press one of the Incline buttons.

While the incline is changing, re-

 

move the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

 

maximum incline level and then return to the minimum level. This will recalibrate the incline.

 

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Customer HOT Line QUESTIONS?Table of Contents Important Precautions Never insert or drop any object into any opening Right Side Using the treadmillBefore YOU Begin Left SideExtension Legs 102 remain in the Uprights AssemblyAssembly requires two people Your own phillips screwdriver Wire cuttersClear plastic on the hood decal, remove it. K Be careful not to pinch the WiresDo not tighten the Bolts yet Tighten all four Handrail BoltsPerformant Lube HOW to Plug in the Power CordSee Features of the ConsolePulse Sensor Clip FollowHOW to USE the Manual Mode HOW to Turn on the PowerDistance/Laps Display Follow your progress with the displaysDisplay Incline/Heart Rate Display7Turn on the fans if desired HOW to USE Preset ProgramsAvoid Moving your Hands ForCline of the treadmill is at the lowest level Stop button, remove the key, and then reinsert the keySee on Measure your heart rate if desiredHOW to Create Custom Programs When the program has ended, remove the keyPress the Start button or the Speed + button HOW to USE Custom Programs Select one of the custom programsTo decrease Enter your age 1Put on the chest pulse sensorInsert the key fully into the console Select a heart rate programWhen the program is completed, remove Key from the console If your pulse is not detected during the program7Follow your progress with the displays HOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes Phones jack, see instruction B HOW to Connect Your Home StereoHOW to Connect Your Computer Plug the adapter into the Line OUT jack on your stereoPrograms HOW to Connect Your VCRConsole Next settings of the CD or video program7When the program has ended, remove the key Start button or the SpeedHOW to USE Programs Directly from OUR WEB Site Next settings of the programFollow the on-line instructions to start Program Information MODE/DEMO Mode HOW to Adjust the Cushioning SystemOptional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold the Treadmill for StorageHold the treadmill firmly with both hands, and lower HOW to Lower the Treadmill for USEPower cord TroubleshootingProblem The power turns off during use SolutionShifted to the left Problem The walking belt slows when walked onPower Cord If the walking belt hasExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Description 105 Transformer 125 Ordering Replacement Parts109 Power Cord Grommet 129 Gear Rack 110 Frame 130 116 Right Cup Holder Black Wire, 2F 117 Left Inside HousingIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Limited WarrantyWhat is COVERED-The entire NordicTrack Part No R1102BR1102B ExplodedExploded DRAWING-Model No. NTL11920
Top Page Image Contents