Accessory Settings
Footpod Calibration*
Calibrate Foot Pod during training (on-the-fly calibration)
Make sure the foot pod function in the Polar FT60
is on. Select Settings > Training settings > Speed sensor > Footpod and press OK.
To calibrate the footpod during training, choosing either alternative:
1.Stop running, stand still, and press and hold LIGHT to go to Quick menu.
OR
2.Stop running, stand still, and press BACK once.
Select Calibrate footpod. Fix the displayed distance with the actual distance you just run, and press OK. Calibration factor set! is displayed. The foot pod is now calibrated and ready for action.
E N G L I S H
Set Calibration Factor Manually
There are two options for setting the calibration factor manually:
1.Before training: Select Settings > Training settings > Footpod calib. factor. Set the calibration factor and press OK. The foot pod is now calibrated.
2.After starting heart rate measurement and before training recording: In the time mode, press OK and then select Training settings > Footpod calib. factor. Set the calibration factor and press OK. The foot pod is now calibrated. To start training recording press BACK once and then select Start.
*Optional S1 foot pod required.