FINAL INSTALLATION
Upon completion of the assembly steps, it may be necessary to move the unit. The 900Er is equipped with an integrated transport wheel which is recessed into the front of the frame. To move the unit, lift the rear frame, using the hand‐hold. Lift the rear end upward until the wheels touch the floor, and carefully roll the unit into position.
Plug the unit into a power outlet.
Ensure the unit is stable by adjusting the leveling feet.
CUSTOM USER ADJUSTMENTS ‐ Diamondback Natural Alignment (DNA)
With the 900Er now assembled and set into place, the user‐specific setting should be adjusted. Diamondback Fitness recognizes the fact that each body is unique. Several built in features allow the user to fine tune the fit of the 900Er for a more ergonomic and comfortable workout. We call these features Diamondback Natural Alignment or DNA.
Variable‐Width Footbeds
The variable‐width footbeds are designed to accommodate the width of an individual’s pelvis. A wider pelvis typically indicates
the body requires a wider gait or stance. The 900Er allows the user to adjust the width of the footbeds from 1.7” (4.3 cm) wide to 3.2” (8.1 cm) to more closely match their natural alignment
and mechanics.
To adjust the footbeds, remove the six (6) clear plastic footbed caps and set aside. Loosen the six
(6)hex bolts until the footbeds moves freely. There is no reason to completely remove the bolts. Align the footbeds to the desired position as indicated by the markings on the footbed liner. Re‐fix the footbeds by tightening the six (6) hex bolts. Reinstall the six (6) footbed caps.
14