Thank you for choosing Precor. For proper installation, please read this guide thoroughly and follow the assembly instructions. If you do not assemble the treadmill according to these guidelines, you could void the Precor Limited Warranty.
Obtaining Service
You should not attempt to service the treadmill except for minor belt adjustments and maintenance as described in the owner’s manual. For information about product operation or service, refer to the Precor web site at www.precor.com or call Precor Customer Support at
Unpacking the Equipment
The treadmill is carefully tested and inspected before shipment. The unit is shipped in one box. Ask for help form two or more people to unpack and assemble the treadmill.
Required Tools
•
•String
•Tape
•Wire tie cutter
Installation Requirements
Follow these installation requirements when assembling the unit:
•Assemble the unit near the location where you plan to use it.
•Provide ample space around the unit.
Open space around the unit allows for easier access.
•Set up the unit on a solid, flat surface.
A smooth, flat surface under the unit helps keep it level. A level unit has fewer malfunctions.
•Open the box and assemble the components in the sequence presented in this guide.
•Insert all bolts in the same direction.
For aesthetic purposes, insert all the bolts in the same direction unless specified (in text or illustrations) to do otherwise.
•Leave room for adjustments.
Tighten fasteners (bolts, nuts, and screws), so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed to do so.
M9.3x | 2 |