Electrolux 137064300 B Reversing door and hardware, Reattaching Door Lock to Front Panel

14Reversing Door

Reversing door and hardware

E)Reattaching Door Lock to Front Panel

1Rotate the door lock and move it to the opposite opening.

2Connect the harness to the door lock by inserting it in the terminal and firmly pushing it in place.

F)Reattaching Hinge to Front Panel

1Rotate the hinge and move it to the opposite opening.

2Connect the harness to the hinge retainer by inserting it in the retention terminal and gently pushing until you hear the fastening tab click.

3Gently pull on the harness to be sure it is secure.

3Insert the harness connection through the front panel first, and then pivot the lock until it is flush. Slide the lock toward the center of the front panel until the screw holes line up.

4Use the side locating pins to align the hinge and install 1 short, fine-thread, counter-sunk screw in the center hole of hinge side.

4Secure the lock with 2 short, course-thread, panhead screws.

5Install the other 2 short, fine-thread, counter- sunk screws in the upper and lower holes of hinge side.

6Install 2 short, course-thread, panhead screws through hinge plate.