Reversing Door 17
Reattaching door and hardware
M) Reattaching Door Assembly
1Open the hinge to a 90 degree angle.
2Install the door onto the hinge locating pins.
3Secure the door with 4 long,
4Close the door and test the operation of the latch.
N)Reversing Trim Ring
1Trim ring orientation is marked on the back.
2Remove the trim ring cover plate. To remove the cover plate from the right, pivot point is up. To remove the cover plate from the left, pivot point is down.
UP
O) Reinstalling Trim Ring
1Close the door.
2Orient the trim so 12 position is approximately ¾” to the left of top center. The opening in the trim ring should be on the hinge side.
3Insert the trim ring in the slots and rotate it clockwise approximately ¾”.
P) Reinstalling Trim Plug
1Open the door to a 90 degree angle.
2Install the trim plug with 1 long, course- thread, panhead screw.
Q) Plug in washer and continue operation.
3Rotate the trim ring cover plate and move it to the opposite opening in the trim and reinsert.