Electrolux WASL3T100 user manual Drainage, Electrical connection, Positioning

Drainage	- The connector at
1
	the end of the flexi-
	ble hose can be at-
	tached	to	all
	common	types	of
	standpipe.
	Attach the connec-
	tor to the standpipe

with the hose clamp supplied with the appliance*.

2	- Fit the U-piece on
	the drainage hose.
	Place everything in
	a drainage point (or
	in a sink) at a height
	of between 70 and
	100 cm. Ensure it is
	positioned secu-

rely. Air must be able to enter the end of the hose, to avoid any risk of siphoning.

The drain hose must never be stretched. If it is too short, contact a tradesperson.

Electrical connection

This washing machine must only be connected in single-phased 230 V. Check the fuse size : 10 A for 230 V. The appliance must not be connected with an extension lead or multi-plug adaptor.

Ensure that the plug is earthed and that it is in accordance with current norms.

* depending on model

technical specifications / installation 47

Positioning

Position the appliance on a flat and hard surface in a ventilated location. Ensure the appliance does not come into con- tact with the wall or other furniture.

To move the appliance, proceed as fol- lows :

1	To move your ap-
	pliance, place it on
	its rollers by pulling
	the lever located at
	the base of the ap-
	pliance	hard	from
	right to	left.	Once
	the appliance		is in

the desired position, push the lever back to its original position.

Accurate levelling avoids vibrations, noi- se and prevents the appliance from mo- ving when running.

2 3