progress, the appliance will ignore the new selected programme. “Err” flashes and the “Start/Pause” pushbutton flashes red for a few seconds then the current cycle display reappears.
Selecting the temperature
60
Press the “Temperature” 
pushbutton repeatedly to increase or decrease the temperature if you want your washing to be washed at a different temperature to the one selected by the appliance. The 
symbol means a cold wash.
Selecting the spin speed
1200 |
how to run a wash cycle 33
for Synthetics, Easy iron, Lingerie, Sport: 900 rpm,
for Delicates, Silk : 700 rpm.
At the end of the programme, if you have selected “Rinse hold” 
or “Night silen- ce plus” 
, you then need to select a “Spin” 
or “Drain” 
programme to fi- nish the cycle.
“No spin” 
The water will be drained without spinning.
“Night silence plus” 
The washing machine does not empty the water after the final rinse which pre- vents the washing from creasing. Be- cause there are no spin cycles, the washing programme is very quiet and can be selected at night. In Cotton and Synthetics programmes, the rinsing cy- cle uses more water.
“Rinse hold” 
The washing machine will not drain the water from the last rinse, so will not crease the laundry.
Press the “Spin” 
pushbutton to chan- ge the spin speed, if you want your washing to be spun at a different speed to the one selected by the appliance. You can also select “No spin” 
*, “Rin- se hold” 
* or “Night silence plus” 
*. The maximum speeds are :
for Cottons, Eco : 1500 rpm,
for Jeans : 1200 rpm,
for Handwash, Wool : 1000 rpm,
*depending on model
Selecting options
You must select the different options af- ter selecting the programme and before pressing the “Start/Pause” pushbutton (see “Programme table”).
Press the desired button(s) ; the corres- ponding lights come on. If pressed again, the lights go out. If one of the op- tions is not compatible with the selected programme, “Err” flashes on the display and the “Start/Pause” pushbutton flashes red.