Time Manager
The washing machine will sug- gest the “Normally soiled laun- dry” cycle by default. The cycle can be made longer or shorter by using the “Time Manager”
pushbuttons. The level of soiling of the laundry is also indicated.
Heavily soiled laundry
Normally soiled laundry
Lightly soiled laundry
Very lightly soiled laundry or half load
The availability of these different levels varies depending on the selected pro- gramme type.
Start of the programme
Press the “Start/Pause” pushbutton to start the cycle ; the correspon- ding light comes on
green and the 
symbol appears (door locked).
2.00
It is normal for the programme selector to remain stationary during the cycle. The symbol for the current cycle and the remaining time appear on the display. If a delayed start has been selected, the countdown appears on the display (hour by hour, then 90, and minute by minute from 60 min).
how to run a wash cycle 35
Warming up
60
During the cycle, the 
symbol comes on when the appliance is reaching the right temperature.
Interrupting a programme
Adding washing
When the “Add washing” light 
is on, you can add washing by proceeding as follows.
Press the “Start/Pause” pushbutton : the corresponding light will flash green while the appliance is paused. The loc- king mechanism “snaps” twice to indi- cate that the lid is open. The 
symbol disappears. Press the “Start/Pause” pushbutton again to continue the pro- gramme.
Modifying the programme in pro- gress
Before making any changes to the cur- rent programme, you need to pause the washing machine by pressing the “Start/ Pause” pushbutton. If the modification is not possible, “Err” flashes in the display and the “Start/Pause” pushbutton flashes red for a few seconds. If you still decide to change the programme, you must cancel the current programme (see below).
Cancelling the programme
If you want to cancel the programme, turn the programme selector to the “Stop” 
position.