36 how to run a wash cycle
End of the programme
The washing machine stops automatically ; the “Start/Pause” pushbutton goes out and “0” flashes on the display. The locking mechanism “snaps” twice to indicate that the lid is open. The 
symbol disappears.
Turn the programme selector to the “Stop” 
position.
Remove washing
Unplug and close water inlet tap.
We recommend leaving the lid and drum open after use to ventilate the water tank.
Standby mode
If the appliance is on but no commands are selected for 10 min before or after a cycle, it goes into standby mode. The screen light goes out and “Start/Pause” flashes slowly.
To exit standby mode, simply press any pushbutton or turn the programme selector.