■In a Timed Cycle, wet items are not detected. The dryer will continue to run for the length of time selected, and the Wet light will illuminate. The damp light will not illuminate.
Damp
The Damp light illuminates in an Automatic Cycle when the laundry is approximately 80% dry. Damp Dry Signal beeps, if selected. See “Options.”
Cool Down
The Cool Down light illuminates during the cool down part of the cycle. Laundry cools for ease in handling.
Done
The Done light illuminates when the drying cycle is finished. This indicator stays on during the WRINKLE SHIELD™ setting.
WRINKLE SHIELD™ Setting
The WRINKLE SHIELD™ setting light illuminates when this option is selected. This indicator stays on during the WRINKLE SHIELD™ setting.
Indicator lights
Other indicator lights show Cycle, Modifiers, Options and Cycle Signal settings selected. The display shows the estimated or actual time remaining.
Cycles
Select the drying cycle that matches the type of load you are drying. See Automatic or Timed Preset Cycle Settings charts.
Automatic Cycles
Automatic Cycles allow you to match the cycle to the load you are drying. See the following Automatic Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying.
Heavy Duty
Use this cycle to get high heat for heavyweight mixed loads, cottons and jeans.
Normal
Use this cycle to get medium heat for drying sturdy fabrics such as work clothes.
Casual
Use this cycle to get low heat for drying
Delicate
Use this cycle to get
Automatic Preset Cycle Settings
Automatic Cycles | Temperature |
Load Type |
|
|
|
HEAVY DUTY | High |
Heavyweight mixed loads, cottons, |
|
jeans |
|
|
|
NORMAL | Medium |
Corduroys, work clothes |
|
|
|
CASUAL | Low |
Business casual clothes, permanent |
|
press, synthetics |
|
|
|
DELICATE | |
Lingerie, blouses, washable knit |
|
fabrics |
|
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing the Time Adjust up or down arrows. See “Changing Cycles, Modifiers and Options.”
NOTE: Timed Cycles may also be used with the dryer rack. See “Dryer Rack.”
Timed Dry
Use this cycle to complete drying if items are still damp after an Automatic Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes.
Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting.
QUICK DRY
Use this cycle for drying small loads or loads that need a short drying time.
Touch Up
Use this cycle to help smooth out wrinkles from such items as clothes packed in a suitcase or items wrinkled from being left in the dryer too long.
Timed Preset Cycle Settings
Timed Cycles | Default | Default Time |
Load Type | Temperature | (Minutes) |
|
|
|
TIMED DRY | High | 40 |
Heavyweight, bulky items, |
|
|
work clothes |
|
|
|
|
|
QUICK DRY | Medium | 24 |
Small loads |
|
|
|
|
|
TOUCH UP | Medium | 20 |
Helps to smooth out |
|
|
wrinkles |
|
|
|
|
|
16