Whirlpool FRONT-LOADING GAS DRYER manual Additional Features

Page 18

ManualCycles

Use Manual Cycles to select a specific amount of drying time and a drying temperature. When a Manual Cycle is selected, the ESTIMATED TIME REMAINING display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing the Manual Dry Time (- or +) buttons.

Timed Dry

Use this cycle to complete drying if items are still damp after an Automatic Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes.

Touchup

Use this setting to help smooth out wrinkles from such items as clothes packed in a suitcase or items wrinkled from being left in the dryer too long.

Rapid Dry

Use this cycle for drying small loads or loads that need a short drying time.

Manual preset cycle settings

Manual Cycles

Temp.

Default Time

Load Type

 

(Minutes)

 

 

 

TIMED DRY

High

40

Heavyweight, bulky items,

 

 

bedspreads, work clothes

 

 

 

 

 

TOUCHUP

Medium

20

Helps to smooth out

 

 

wrinkles

 

 

 

 

 

RAPID DRY

High

27

Small loads

 

 

Additional Features

Extra Care Feature

When you are unable to remove a load of clothes from the dryer as soon as it stops, wrinkles can form. The Extra Care feature periodically tumbles, rearranges and fluffs the load to help reduce wrinkling.

Press the Extra Care feature to get up to 120 minutes of heat- free, periodic tumbling at the end of a cycle.

Stop at any time by pressing the Extra Care feature or opening the dryer door.

For the Casual Cycle, the Extra Care feature is preset to “On.” The other Automatic Cycles will retain the Extra Care feature setting. (For example, if you select the Extra Care feature in the Normal cycle, the Extra Care feature will be on the next time you select the Normal cycle.)

NOTE: If you do not select the Extra Care feature, the dryer stops after the cool down period.

Temperature

Temperature settings are used with the Manual Cycles. Press TEMP until the desired temperature setting glows. Temperature settings cannot be used with the Automatic Cycles.

Air Only

Use the Air Only setting for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This chart shows examples of items that can be dried using Air Only.

Type of Load

Time*

 

(Minutes)

 

 

Foam rubber - pillows, padded bras,

20 - 30

stuffed toys

 

 

 

Plastic - Shower curtains, tablecloths

20 - 30

 

 

Rubber-backed rugs

40 - 50

 

 

Olefin, polypropylene, sheer nylon

10 - 20

*Reset time to complete drying, if needed.

When using Air Only

Check that coverings are securely stitched.

Shake and fluff pillows by hand periodically during the cycle.

Dry item completely. Foam rubber pillows are slow to dry.

NOTE: Automatic Cycles are not available when using the Air Only setting.

Cycle End Signal

The Cycle End Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling.

Press and release the CYCLE END SIGNAL to adjust the sound level or turn off the signal.

NOTE: When the Extra Care feature is selected and the Cycle End Signal is on, an audible sound will emit every 5 minutes until the clothes are removed, or the Extra Care feature is finished.

18

Image 18
Contents Table of Contents/Índice/Table des matières FRONT-LOADING GAS DryerTable of Contents ÍndiceTable DES Matières Dryer Safety Your safety and the safety of others are very importantParts needed Installation InstructionsTools and Parts Parts suppliedOptions Location RequirementsCloset installation Dryer only Minimum installation spacing for cabinet installationCustom undercounter installation Dryer only Recessed or closet installation Dryer on pedestalGas Supply Requirements Mobile home Additional installation requirementsElectrical Requirements Gas TypeGas supply pressure testing Burner input requirementsDryer gas pipe If using an existing vent system Venting RequirementsIf this is a new vent system Vent material Special provisions for mobile home installations Optional exhaust installationsAlternate installations for close clearances Plan VentSystemVent system chart InstallVent SystemInstallLeveling Legs Determine vent pathLevel Dryer Make Gas ConnectionConnect Vent Reverse Door SwingReinstalling the door Reverse the hinge and hinge bracketComplete Installation Close the door and check that it latches securelyIf the dryer will not start, check the following Dryer USE Starting Your Dryer To use an Automatic Cycle Control Locked Pausingor RestartingStopping Your Dryer Drying and Cycle TipsStatusLights CyclesAdditional Features Every load cleaning Cleaning the Dryer LocationCleaningthe LintScreen Dryer CareVacation and MovingCare Cleaningthe Dryer InteriorRemoving Accumulated Lint Changing the Drum LightTroubleshooting Dryer OperationAssistance or Service U.S.ACanada Kitchenaid Dryer Warranty KitchenAid or KitchenAid Canada will not pay forSeguridad DE LA Secadora Su seguridad y la seguridad de los demás es muy importanteInstrucciones Importantes DE Seguridad Opciones Instrucciones DE InstalaciónHerramientas ypiezas Requisitosde ubicaciónDimensiones de la secadora Se recomienda espacio adicionalInstalación en el clóset Sólo para la secadora Espacio mínimo para la instalación en un armario Las instalaciones en casas rodantes necesitanTipo de gas RequisitoseléctricosRequisitosdel suministro de gas La línea de suministro de gasRequisitos de entrada del quemador El tubo de gas de la secadoraRequisitos de ventilación Si usa un sistema de ventilación existenteSi éste es un nuevo sistema de ventilación Planificación delsistema de ventilación Instalaciones opcionales de escapeInstalaciones alternas para espacios limitados Determinación de la vía del ducto de escape Instalación delsistema de ventilaciónInstalación de las patas niveladoras Cuadro del sistema de ventilaciónPara su uso en casas rodantes Conexión del suministrode gasConexión del ducto de escape DiamanteCómo quitar la puerta Nivelación de la secadoraCómo invertir elcierre de la puerta Cómo invertir la bisagra y el soporte de la bisagraCierre la puerta y fíjese que se cierre con seguridad Complete la instalaciónCómo volver a instalar la puerta Si la secadora no funciona, revise lo siguientePara usar un ciclo Automático USO DE LA SecadoraPuesta en marcha de la secadora Dirija el selector hacia un ciclo AutomáticoControl bloqueado Detención de la marcha De la secadoraPausa o reanudación de la marcha Sugerencias de ciclos ysecadoLuces de estado CiclosCaracterísticasadicionales Sólo aire Air Only Señal de Fin de Ciclo Cycle End SignalEstante de secado Cuando use Sólo aireLimpieza del filtro de pelusa Cuidado DE LA SecadoraLimpieza dellugar donde está La secadora Limpieza de cada cargaSolución DE Problemas Resultados de la secadora Sonidos rarosLa secadora muestra mensajes codificados Ayuda O Servicio Técnico Garantía DE LA Secadora Kitchenaid KitchenAid no pagará porSécurité DE LA Sécheuse Votre sécurité et celle des autres est très importanteImportantes Instructions DE Sécurité Instructions D’INSTALLATION Exigences d’emplacementOutillage etpièces Espacements dinstallation Dimensions de la sécheuseInstallation dans un placard Sécheuse seulement Linstallation dans une maison mobile exige Les dimensions indiquées sont pour lespacement recommandéType de gaz Spécifications électriquesSpécifications de lalimentation en gaz Canalisation d’arrivée de gazCaractéristiques d’alimentation du brûleur Test de pression de l’alimentation en gazCanalisation d’arrivée de gaz de la sécheuse Exigences concernant lévacuation En cas dutilisation du système dévacuation existantPlanification du système d’évacuation Installations d’évacuation facultativesAutres installations où le dégagement est réduit Le clapet incliné de type boîte ci-dessous est acceptableDéterminer litinéraire dacheminement du conduit Installation du système d’évacuationInstallation despiedsde nivellement Tableau des systèmes dévacuationRaccordementau gaz Raccordement du conduitd’évacuationUtilisation dans une maison mobile Enlever la porte Mise à niveau de la sécheuseInversion de louverture de la porte Inverser la charnière et son supportFermer la porte et vérifier qu’elle s’enclenche solidement Achever l’installationRéinstallation de la porte Si la sécheuse ne démarre pas, vérifier ce qui suitUtilisation DE LA Sécheuse Mise en marche de la sécheuseUtilisation dun programme automatique Pause ou remise en marche Verrouillage descommandesArrêt de la sécheuse Conseilspour le séchage et lesprogrammesTémoins lumineux Programmes Caractéristiques supplémentaires Grille de séchage Nettoyage du filtre à charpie Nettoyage de lemplacement de La sécheuseEntretien DE LA Sécheuse Nettoyage de l’intérieur de la sécheuseRetraitde la charpie accumulée Changementde l’ampoule d’éclairage Du tambourDépannage Fonctionnementde la sécheuseRésultatsde la sécheuse Taches sur la charge ou sur le tambour Temps de programme trop courtCharpie sur la charge Charges froisséesPour plus d’assistance Assistance OU ServiceSi vous avez besoin de pièces de rechange Nos consultants vous renseigneront sur les sujets suivantsGarantie DE LA Sécheuse Kitchenaid KitchenAid Canada ne paiera pas pour8562593B All rights reserved