Burner input requirements

■Must include a shutoff valve:

In the U.S.A.:

An individual manual shutoff valve must be installed within six (6) feet (1.8 m) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223.1.

In Canada:

An individual manual shutoff valve must be installed in accordance with the B149.1, Natural Gas and Propane Installation Code. It is recommended that an individual manual shutoff valve be installed within six (6) feet (1.8 m) of the dryer.

The location should be easy to reach for opening and closing.

A C E

A. ³⁄₈" flexible gas connector

B. ³⁄₈" pipe to flare adapter fitting

C. ¹⁄₈" NPT minimum plugged tapping

D. ½" NPT gas supply line

E. Gas shutoff valve

Gas supply connection requirements

■For close clearances, a ³⁄₈" to ³⁄₈" elbow is recommended to avoid kinking of the gas line.

■Use only pipe-joint compound. Do not use TEFLON®† tape.

There are many methods by which your gas dryer can be connected to the gas supply. Listed here are some guidelines for two different methods of connection.

Option 1 (Recommended method)

Flexible stainless steel gas connector:

■If local codes permit, use a new flexible stainless steel gas connector (Design Certified by CSA International) to connect your dryer to the rigid gas supply line. Use an elbow and a ³⁄₈" flare x ³⁄₈" NPT adapter fitting between the stainless steel gas connector and the dryer gas pipe, as needed to avoid kinking.

Option 2 (Alternate method)

Approved aluminum or copper tubing:

■Lengths under 20 ft (6.1 m) can use ³⁄₈" approved tubing (if codes and gas supplier permit).

■If you are using Natural gas, do not use copper tubing.

■³⁄₈" flare x ³⁄₈" NPT adapter fitting between dryer pipe and ³⁄₈" approved tubing.

■Lengths over 20 ft (6.1 m) should use larger tubing and a different size adapter fitting.

■If your dryer has been converted to use LP gas, ³⁄₈" LP compatible copper tubing can be used. If the total length of the supply line is more than 20 ft (6.1 m), use larger tubing.

NOTE: Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape.

Elevations up to 10,000 ft (3,048 m):

■The design of this dryer is certified by CSA International for use at altitudes up to 10,000 ft (3,048 m) above sea level at the B.T.U. rating indicated on the model/serial number plate. Burner input adjustments are not required when the dryer is operated up to this elevation.

Elevations above 10,000 ft (3,048 m):

■When installed above 10,000 ft (3,048 m) a 4% reduction of the burner B.T.U. rating shown on the model/serial number plate is required for each 1,000 ft (305 m) increase in elevation.

Gas supply pressure testing

■The dryer must be disconnected from the gas supply piping system during pressure testing at pressures greater than ½ psi.

Dryer gas pipe

■The gas pipe that comes out through the rear of your dryer has a ³⁄₈" male pipe thread.

*6¼"

(15.9 cm)

A		1½"
		(3.8 cm)

A. ½" NPT gas supply line

B. ³⁄₈" NPT dryer pipe

*NOTE: If the dryer is mounted on a pedestal, the gas pipe height must be an additional 13" (33 cm) from the floor. For a garage installation, the gas pipe height must be an additional

18" (46 cm) from the floor.

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

FRONT-LOADING GAS DRYER specifications

The Whirlpool front-loading gas dryer is a pinnacle of modern laundry technology, combining efficiency, performance, and convenience. Designed to meet the demands of busy households, it offers a range of features that simplify the drying process while ensuring optimal results for all types of fabrics.

One of the standout features of this gas dryer is its advanced moisture sensing technology. The sensor detects when clothes are dry and automatically stops the cycle, preventing over-drying and saving energy. This not only protects garments from damage but also reduces energy consumption, making it an environmentally friendly choice.

In terms of capacity, the Whirlpool front-loading gas dryer boasts a generous drum size that accommodates large loads, allowing users to spend less time doing laundry. The smooth surface of the drum prevents snagging, which is especially important for delicate items. The dryer also features multiple drying cycles, including options for heavy-duty and delicate fabrics, ensuring tailored care for each load.

Moreover, the dryer is equipped with the EcoBoost option, which utilizes a lower heat setting and extended drying time to save energy without compromising drying quality. This makes it an ideal choice for the eco-conscious consumer seeking to reduce their carbon footprint.

Another remarkable characteristic of this gas dryer is its steam-enhanced cycles. The steam feature helps to reduce wrinkles and odors, providing a fresh finish to garments straight from the dryer. This is particularly beneficial for busy individuals who need to look sharp without the hassle of ironing.

The control panel of the Whirlpool front-loading gas dryer is designed for user-friendliness, featuring a clear display and intuitive controls that allow for easy selection of drying settings. The Wrinkle Shield option is also included, which periodically tumbles the load after the cycle ends to keep wrinkles at bay.

Safety is a key consideration in the design, and this dryer includes a lint screen that is easy to clean, ensuring that the appliance operates efficiently and safely.

In conclusion, the Whirlpool front-loading gas dryer is an excellent addition to any laundry room, providing a blend of advanced technologies, thoughtful features, and superior drying performance. Whether tackling everyday laundry or special care items, this dryer delivers on the promise of quality, efficiency, and convenience.