Miele G 7783 CD operating instructions Adjusting the top basket, To adjust the top basket

Page 16

Applications and loading

Adjusting the top basket

Adjustable top baskets can be used in this machine, They can be adjusted up or down by 2 cm from the middle posi- tion set on delivery.

The top basket will accommodate:

Vessels and glassware up to 19 cm in height.

The bottom basket will accommodate:

Vessels and glasses up to 25 cm in height.

Top basket	Top basket	Bottom
position	height (cm)	basket
		height (cm)

Top	17	27

Middle	19	25

Bottom	21	23

To adjust the top basket

Pull out the top basket until a resist- ance is felt, lift from the runners and remove.

Unscrew the roller supports on both sides of the basket with a 7 mm spanner, reposition as required and re-tighten.

16

Image 16

Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Accessories Disposal of an old machineDescription of the machine Available at extra costSetting the water softener Setting the WaterSoftenerReactivating the water softener, see To open the door a Opening and closing the doorTo close the door Loading the machine Applications and loadingRemoving excess soils Loading example 109 Top basket frame can take various inserts106 Adjusting the top basket To adjust the top basketSetting the dosage Rinsing agentAdding Rinsing agent Refilling with rinsing agentAdding neutralising agent Adding neutralising agent and liquid detergentAdding detergents Venting the liquid dispensing system Venting the liquid dispensing system / MaintenanceChecking the dispensing system Adding powder detergent Adding detergent Programme B, and when using O-175 or a pipette plateProgramme selection Programme chart = Cold7783 CD Instructions for the operatorPage Page Accessories 93C 70C Switching the machine on and off Selecting a programmeSelecting an additional pro- gramme Programme ChangesSwitching the machine on and off Switching off Programme sequence indicatorInterrupting a programme 1b. Hot water connection 1a. Cold water connection1c. AD water connection Programming special functions Reactivating the water softener Filling the salt containerSwitch on the machine Position the salt container as followsCleaning and care Cleaning the filters in the water cabinetCleaning the coarse filter Cleaning the fine, flat and micro-fine filtersCleaning the filters in the water inlet Changing the Coarse Filter Drying unit TA cleaning and careExchanging the S-class particle filter Faults/Possible Causes Correcting minor faultsMachine does not start Important for machines with DHK steam condensor InstallationPosition and secure the machine Cover plate worktop protection To remove service panel and cover plate Electrical connectionElectrical connection Plumbing Connection to the water inletAD connection to purified water, pressurised, 1.5 10 bar Connection to purified water non- pressurised 0 1.5 barDrainage Ventilation of the wash cabinet at rearDisposal of the packing material Caring for the environmentDisposal of your old machine Technical Data Noise emission in dB a