Miele G 7783 CD operating instructions Description of the machine, Available at extra cost

Page 9

Description of the machine

The G 7783 CD is a front-loading auto- matic machine for the efficient washing

-neutralising - rinsing - final rinsing of laboratory glassware. It can be oper- ated on normal water supply. There are "AD" (aqua destillata) programmes with final rinses using purified water (dis- tilled, R.O., or de-ionised).

On completion of the automatic pro- gramme sequence, laboratory glass- ware is cleaned to the standard re- quired for analysis.

The electronic control unit offers a choice of temperatures for the cleaning and final rinsing phases. A combination often preferred is cleaning - T1 85° C and final rinse T2 70 °C.

With the SPECIAL "B" programme the machine can thermally disinfect at 90°C with relevant holding times.

"Instrument disinfection in automatic machines" is to be found under subsec- tion 3.2.4. of paragraph 10c of BSeuchG, according to the German Federal Health Authority, Berlin (BGA). The disinfection parameters of between 90°C and 93°C held for 10 minutes apply to the effective areas A + B. Re-

duction factor 7 (by reduction factor ~107).

The effective areas are defined as fol- lows:

A = Suitable for destruction of vegeta- tive bacteria, including myco-bacteria and fungus and fungal spores.

B = Suitable for inactivation of viruses Including HBV and HIV).

The SPECIAL "B" programme operates at 90°C with 10 minutes holding time.

This machine is fitted with a TA drying unit and water softener as standard.

Available at extra cost:

– Machine lid

9

Image 9
Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Disposal of an old machine AccessoriesAvailable at extra cost Description of the machineSetting the WaterSoftener Setting the water softenerReactivating the water softener, see Opening and closing the door To open the door aTo close the door Applications and loading Loading the machineRemoving excess soils Loading example Top basket frame can take various inserts 109106 To adjust the top basket Adjusting the top basketRinsing agent Setting the dosageAdding Rinsing agent Refilling with rinsing agentAdding neutralising agent and liquid detergent Adding neutralising agentAdding detergents Venting the liquid dispensing system / Maintenance Venting the liquid dispensing systemChecking the dispensing system Adding powder detergent Programme B, and when using O-175 or a pipette plate Adding detergentProgramme selection = Cold Programme chartInstructions for the operator 7783 CDPage Page Accessories 93C 70C Selecting a programme Switching the machine on and offSelecting an additional pro- gramme Programme ChangesSwitching the machine on and off Programme sequence indicator Switching offInterrupting a programme 1a. Cold water connection 1b. Hot water connection1c. AD water connection Programming special functions Filling the salt container Reactivating the water softenerPosition the salt container as follows Switch on the machineCleaning the filters in the water cabinet Cleaning and careCleaning the coarse filter Cleaning the fine, flat and micro-fine filtersCleaning the filters in the water inlet Drying unit TA cleaning and care Changing the Coarse FilterExchanging the S-class particle filter Correcting minor faults Faults/Possible CausesMachine does not start Installation Important for machines with DHK steam condensorPosition and secure the machine Cover plate worktop protection Electrical connection To remove service panel and cover plateElectrical connection Connection to the water inlet PlumbingConnection to purified water non- pressurised 0 1.5 bar AD connection to purified water, pressurised, 1.5 10 barVentilation of the wash cabinet at rear DrainageCaring for the environment Disposal of the packing materialDisposal of your old machine Noise emission in dB a Technical Data