G 7783 CD | Warning and safety instructions |
|
Instructions for the operator:
Remove these pages and ensure that they are fixed in a position clearly visible to the system operator in direct proximity to the installation site.
Instruct and encourage operating personnel to heed the warning and safety in- structions.
This machine conforms to current safety requirements. Inappropriate use can however lead to personal injury and damage to property.
Read the operating instructions carefully before starting to use this machine. This way you will avoid the risk of accidents, and damage to the machine.
Keep these instructions in a safe place, and make them available to future users.
Correct usage
This machine is designed for com- mercial use and for specialised ap-
plications only, as described in these Operating Instructions. Using it for pur- poses other than those for which it was designed would be unauthorised and could cause harm.
The manufacturer cannot be held re- sponsible for damage caused by im- proper use.
Please pay attention to the following notes, to maintain safe procedures.
The machine should be commis- sioned and then maintained only by
the Miele Service Department, an auth- orised Miele Service Dealer or other ap- proved competent person.
Do not install the machine in an area where a danger of explosion
may be present.
The electrical safety of this ma- chine can only be guaranteed if
connected to a correctly installed ear- thing system on site. It is most import- ant that this basic safety requirement is met and complies with local and na- tional regulations. It should be checked by an expert if necessary.
The manufacturer cannot be held re- sponsible for damage caused by mis- sing or defective earthing, such as electric shock.
A damaged machine is dan- gerous. Switch off at the mains im-
mediately and call an authorised Miele service dealer, or suitably competent engineer.
Repair work may only be carried out by an authorised, suitably com-
petent person. Repairs by unqualified persons could be dangerous.
Personnel operating the machine should be trained regularly. Child-
ren and untrained personnel should not be allowed access to the machine or its controls.
1