Miele Comprehensive Guide to Features of the G 7783 Washer

Page 4

Guide to the machine

10 11 12 13 14

15

16

17

18

19

20

10Dispenser for neutralising agent (DOS 10 - red) and liquid detergent (DOS 60 - blue)

11Drying unit (TA)

12Safety fuse for TA Drying Unit

13Time counter for TA Drying Unit

14Temperature selector for TA Drying Unit

15Service panel

16Dispenser for powder detergent

17Dispenser for liquid rinsing agent with dosage selector

18Level indicator

19Filter combination

20Connection socket for salt container (water softener)

4

Image 4

Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Accessories Disposal of an old machineDescription of the machine Available at extra costSetting the water softener Setting the WaterSoftenerReactivating the water softener, see To open the door a Opening and closing the doorTo close the door Loading the machine Applications and loadingRemoving excess soils Loading example 109 Top basket frame can take various inserts106 Adjusting the top basket To adjust the top basketSetting the dosage Rinsing agentAdding Rinsing agent Refilling with rinsing agentAdding neutralising agent Adding neutralising agent and liquid detergentAdding detergents Venting the liquid dispensing system Venting the liquid dispensing system / MaintenanceChecking the dispensing system Adding powder detergent Adding detergent Programme B, and when using O-175 or a pipette plateProgramme selection Programme chart = Cold7783 CD Instructions for the operatorPage Page Accessories 93C 70C Switching the machine on and off Selecting a programmeSelecting an additional pro- gramme Programme ChangesSwitching the machine on and off Switching off Programme sequence indicatorInterrupting a programme 1b. Hot water connection 1a. Cold water connection1c. AD water connection Programming special functions Reactivating the water softener Filling the salt containerSwitch on the machine Position the salt container as followsCleaning and care Cleaning the filters in the water cabinetCleaning the coarse filter Cleaning the fine, flat and micro-fine filtersCleaning the filters in the water inlet Changing the Coarse Filter Drying unit TA cleaning and careExchanging the S-class particle filter Faults/Possible Causes Correcting minor faultsMachine does not start Important for machines with DHK steam condensor InstallationPosition and secure the machine Cover plate worktop protection To remove service panel and cover plate Electrical connectionElectrical connection Plumbing Connection to the water inletAD connection to purified water, pressurised, 1.5 10 bar Connection to purified water non- pressurised 0 1.5 barDrainage Ventilation of the wash cabinet at rearDisposal of the packing material Caring for the environmentDisposal of your old machine Technical Data Noise emission in dB a