Miele G 7783 CD Switching the machine on and off, Selecting a programme, Programme Changes

Page 28

Switching the machine on and off

	°C			•	C	•	T1 •
	• min	•
	•		I-O	•	D	•	T
		•					2 •
DOS	•	•	A	•	E	•	10’- 80’ •
		•
	•	•	B	•	F	•	•
		DESIN •
1. Switching on			Programme Changes

Press the I-0 button.

2. Selecting a programme

After switching on the machine the indi- cator lights next to the selectors will light up to show the programmes avail- able.

Press the programme selector for the required programme. The wash temperature of the programme se- lected will show up in the display field.

Select additional programme T1 / T2 "TEMPERATURE" and/or

c"DRYING"

(see "Selecting an additional pro- gramme").

Press the h "Start" touch pad.. The display panel will now show the run- ning time in ascending minutes for the selected programme.

During the heat-up stage in "Wash- ing/disinfecting" and "Final rinse" the end temperature will be displayed in the panel.

All other programmes are automatically blocked and only the lights for the pro- gramme selected stay on.

Provided the "Start" touch pad has not yet been pressed, a wrongly selected programme may be changed as fol- lows:

Press the appropriate touch pad to select the required programme.

Press the h "Start" touch pad.

Otherwise "Interrupt programme" (see page after next).

3.Selecting an additional pro- gramme

The following additional programmes are available:

T1 TEMPERATURE FOR WASHING T2 TEMPERATURE FOR FINAL RINS- ING

Immediately after the selection of a washing programme the temperature for washing and for final rinsing can be altered through the additional pro- gramme "Temperature". Press on the appropriate touch pad T1 or T2 for as many times as necessary to change the temperature step by step (40°C / 50°C / 60°C / 70°C / 85°C / 93°C). The last temperature chosen will be stored for the following wash/rinse cycles, and will be shown in the display field.

24

Image 28

Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Accessories Disposal of an old machineDescription of the machine Available at extra costSetting the water softener Setting the WaterSoftenerReactivating the water softener, see To open the door a Opening and closing the doorTo close the door Loading the machine Applications and loadingRemoving excess soils Loading example 109 Top basket frame can take various inserts106 Adjusting the top basket To adjust the top basketSetting the dosage Rinsing agentAdding Rinsing agent Refilling with rinsing agentAdding neutralising agent Adding neutralising agent and liquid detergentAdding detergents Venting the liquid dispensing system Venting the liquid dispensing system / MaintenanceChecking the dispensing system Adding powder detergent Adding detergent Programme B, and when using O-175 or a pipette plateProgramme selection Programme chart = Cold7783 CD Instructions for the operatorPage Page Accessories 93C 70C Switching the machine on and off Selecting a programmeSelecting an additional pro- gramme Programme ChangesSwitching the machine on and off Switching off Programme sequence indicatorInterrupting a programme 1b. Hot water connection 1a. Cold water connection1c. AD water connection Programming special functions Reactivating the water softener Filling the salt containerSwitch on the machine Position the salt container as followsCleaning and care Cleaning the filters in the water cabinetCleaning the coarse filter Cleaning the fine, flat and micro-fine filtersCleaning the filters in the water inlet Changing the Coarse Filter Drying unit TA cleaning and careExchanging the S-class particle filter Faults/Possible Causes Correcting minor faultsMachine does not start Important for machines with DHK steam condensor InstallationPosition and secure the machine Cover plate worktop protection To remove service panel and cover plate Electrical connectionElectrical connection Plumbing Connection to the water inletAD connection to purified water, pressurised, 1.5 10 bar Connection to purified water non- pressurised 0 1.5 barDrainage Ventilation of the wash cabinet at rearDisposal of the packing material Caring for the environmentDisposal of your old machine Technical Data Noise emission in dB a