Miele G 7783 CD operating instructions Adding detergent, Programme selection

Page 21

Adding detergent	Programme selection

Programme "B", and when using O-175 or a pipette plate

Add powder detergent directly to the inside of the door or dispense liquid detergent via DOS 60.

An additional dose of powder detergent can be added to the inside of the door where required in applications E and F (see Programme chart).

When selecting a cleaning agent please bear in mind the ecological ef- fects, in particular the following con- siderations:

How much alkalinity is needed to do the required cleaning?

Is bleach required for disinfection or stain removal?

Are tensides at all necessary for dis- persal or emulsification?

The thermal disinfection programme requires the use of a suitable mildly alkaline or active chlorine-free cleaner.

Under certain circumstances, i.e. spe- cial soiling, different combinations of detergents and other additives may be necessary. Consult your Miele labora- tory dealer.

Take care when handling liquids such as detergents, disinfecting and neutralising agents. These may contain acids, alkalis or disinfec- tants. Follow the relevant safety procedures and the instructions on the packaging carefully.

Wear protective gloves and goggles if necessary.

Programme selection

Choose your programme according to the type of glassware and the degree of soiling.

The different programmes and their ap- plications are described overleaf in the "Programme chart".

21

Image 21

Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Disposal of an old machine AccessoriesAvailable at extra cost Description of the machineSetting the WaterSoftener Setting the water softenerReactivating the water softener, see Opening and closing the door To open the door aTo close the door Applications and loading Loading the machineRemoving excess soils Loading example Top basket frame can take various inserts 109106 To adjust the top basket Adjusting the top basketRinsing agent Setting the dosageAdding Rinsing agent Refilling with rinsing agentAdding neutralising agent and liquid detergent Adding neutralising agentAdding detergents Venting the liquid dispensing system / Maintenance Venting the liquid dispensing systemChecking the dispensing system Adding powder detergent Programme B, and when using O-175 or a pipette plate Adding detergentProgramme selection = Cold Programme chartInstructions for the operator 7783 CDPage Page Accessories 93C 70C Selecting a programme Switching the machine on and offSelecting an additional pro- gramme Programme ChangesSwitching the machine on and off Programme sequence indicator Switching offInterrupting a programme 1a. Cold water connection 1b. Hot water connection1c. AD water connection Programming special functions Filling the salt container Reactivating the water softenerPosition the salt container as follows Switch on the machineCleaning the filters in the water cabinet Cleaning and careCleaning the coarse filter Cleaning the fine, flat and micro-fine filtersCleaning the filters in the water inlet Drying unit TA cleaning and care Changing the Coarse FilterExchanging the S-class particle filter Correcting minor faults Faults/Possible CausesMachine does not start Installation Important for machines with DHK steam condensorPosition and secure the machine Cover plate worktop protection Electrical connection To remove service panel and cover plateElectrical connection Connection to the water inlet PlumbingConnection to purified water non- pressurised 0 1.5 bar AD connection to purified water, pressurised, 1.5 10 barVentilation of the wash cabinet at rear DrainageCaring for the environment Disposal of the packing materialDisposal of your old machine Noise emission in dB a Technical Data