Venting the liquid dispensing system / Maintenance
Venting the liquid dispensing system
Before using the machine for the first time, or if the container had not been filled in time and allowed to empty, the dispensing system for liquid agents (apart from rinsing agent) must be vented.
Proceed as follows:
Press the
A |
B |
Switch "A":
Dispensing system for neutralising agent.
Switch "B":
Dispensing system for detergent (if using liquid detergent).
Use a pointed object to press in switch "A" and/or "B" at the left hand side end of the control panel for three and a half minutes.
Each time the system is vented any liq- uid which runs into the wash cabinet must be washed out as follows:
Select programme "A" (Cold).
After this has run the dispensing sys- tem is filled and ready for use.
Checking the dispensing system
To maintain the performance of the dis- pensing system, it should be serviced at regular intervals.
This work should only be carried out by suitably qualified people or by a MIELE Service Engineer.
Every
–Replace the dispensing hoses in either the dispensing systems or the DOS modules.
19