Miele G 7783 CD Adding neutralising agent and liquid detergent, Adding detergents

Adding neutralising agent and (liquid) detergent

Adding neutralising agent

To reduce the pH to neutral after alkaline cleaning, special neutralising acids can be used in programme stage 4.

Important "Special functions" must first be used to set the programme to dis- pense neutralising agent in stage 4, in- stead of rinsing agent.

When the w indicator light on the con- trol panel lights up:

Fill the container DOS 10 (red mark- ings) with neutralising agent, or change containers, and then:

Place the siphon tube firmly in the opening of the free-standing con- tainer (pay attention to colour cod- ing).

Re-fill the container in good time, it should never be allowed to empty com- pletely.

Adding detergents

Detergent can be added in either liquid or powder form (for powder detergent, see relevant section, p. 18)

When the indicator light "DOS" on the control panel lights up:

Fill the container DOS 60 (blue mark- ings) with liquid detergent, or change containers, and then:

Place the siphon tube firmly in the opening of the free-standing con- tainer (pay attention to colour cod- ing).

Re-fill the container in good time, it should never be allowed to empty com- pletely.

Note: If adding an extra dose of deter- gent in the pre-wash of programmes E and F (see "Programme chart"), only powder detergent can be used.

18