Miele G 7783 CD operating instructions Switching the machine on and off

Switching the machine on and off

cDRYING

The additional programme "DRYING" can be selected for 10 minutes steps up to a total of 80 minutes immediately after the selection of a cleaning pro- gramme except for (except A "COLD").

Selecting the drying time

Press c as many times as necess- ary to change the drying time step by step until the desired time is dis- played (shown in the display field). For example:

Press once - 10 mins

Press twice - 20 mins and so on.

The drying cycle will automatically begin 10 minutes after the final rinse. The drying time display will then count down as time goes on.

Selecting the Drying Temperature

The drying temperature is set using the temperature selector for the (TA) Drying Unit.

To do this:

Take off the service panel (see "Elec- trical Connection").

Check the setting of the TA tempera- ture selector. the temperature can be freely set between 55°C and 95°C and is electronically controlled.

–approx. 95°C (max. temperature) for normal items (set ex-works),

–approx. 70°C

for items with parts made of rubber, latex or plastics, with a specified tem- perature tolerance,

–approx. 55°C

for items which are particularly heat- sensitive.

Please use the key supplied to switch over.

Note:

If on completion of a programme sub- sequent drying is necessary:

Select the programme q DRAIN (running time only approx. 1 minute) with the additional programme c DRYING (see above).

25