Miele G 7783 CD operating instructions Cleaning the filters in the water inlet

Page 36

Cleaning and care

Cleaning the filters in the water inlet

For the protection of the inlet valve(s), filters are incorporated in the screw connection of the water inlet hose. The filters must be cleaned when dirty, otherwise insufficient water flows into the wash cabinet.

Turn off stopcocks.

Unscrew the water inlet hoses.

1

2

Clean large area filter (1) and fine filter

(2) or replace if necessary.

After reconnection, turn on the stop- cock to test for leaks.

There is a further filter in front of the water inlet valve which must only be cleaned or replaced by a suitably quali- fied and competent person.

32

Image 36
Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Accessories Disposal of an old machineDescription of the machine Available at extra costSetting the water softener Setting the WaterSoftenerReactivating the water softener, see Opening and closing the door To open the door aTo close the door Applications and loading Loading the machineRemoving excess soils Loading example Top basket frame can take various inserts 109106 Adjusting the top basket To adjust the top basketSetting the dosage Rinsing agentAdding Rinsing agent Refilling with rinsing agentAdding neutralising agent and liquid detergent Adding neutralising agentAdding detergents Venting the liquid dispensing system / Maintenance Venting the liquid dispensing systemChecking the dispensing system Adding powder detergent Programme B, and when using O-175 or a pipette plate Adding detergentProgramme selection Programme chart = Cold7783 CD Instructions for the operatorPage Page Accessories 93C 70C Switching the machine on and off Selecting a programmeSelecting an additional pro- gramme Programme ChangesSwitching the machine on and off Programme sequence indicator Switching offInterrupting a programme 1a. Cold water connection 1b. Hot water connection1c. AD water connection Programming special functions Reactivating the water softener Filling the salt containerSwitch on the machine Position the salt container as followsCleaning and care Cleaning the filters in the water cabinetCleaning the coarse filter Cleaning the fine, flat and micro-fine filtersCleaning the filters in the water inlet Drying unit TA cleaning and care Changing the Coarse FilterExchanging the S-class particle filter Correcting minor faults Faults/Possible CausesMachine does not start Installation Important for machines with DHK steam condensorPosition and secure the machine Cover plate worktop protection To remove service panel and cover plate Electrical connectionElectrical connection Plumbing Connection to the water inletAD connection to purified water, pressurised, 1.5 10 bar Connection to purified water non- pressurised 0 1.5 barDrainage Ventilation of the wash cabinet at rearCaring for the environment Disposal of the packing materialDisposal of your old machine Technical Data Noise emission in dB a