Miele G 7783 CD operating instructions Electrical connection

Page 42

Electrical connection

Remove the plastic protective cap.

To re-assemble:

Refit plastic protective cap, cover plate and service panel in the reverse order to which they were removed.

Make certain that the earth lead is reconnected.

Consult the Installation Instructions sup- plied.

38

Image 42

Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Accessories Disposal of an old machineDescription of the machine Available at extra costSetting the water softener Setting the WaterSoftenerReactivating the water softener, see Opening and closing the door To open the door aTo close the door Applications and loading Loading the machineRemoving excess soils Loading example Top basket frame can take various inserts 109106 Adjusting the top basket To adjust the top basketAdding Rinsing agent Setting the dosageRinsing agent Refilling with rinsing agentAdding neutralising agent and liquid detergent Adding neutralising agentAdding detergents Venting the liquid dispensing system / Maintenance Venting the liquid dispensing systemChecking the dispensing system Adding powder detergent Programme B, and when using O-175 or a pipette plate Adding detergentProgramme selection Programme chart = Cold7783 CD Instructions for the operatorPage Page Accessories 93C 70C Selecting an additional pro- gramme Switching the machine on and offSelecting a programme Programme ChangesSwitching the machine on and off Programme sequence indicator Switching offInterrupting a programme 1a. Cold water connection 1b. Hot water connection1c. AD water connection Programming special functions Reactivating the water softener Filling the salt containerSwitch on the machine Position the salt container as followsCleaning the coarse filter Cleaning and careCleaning the filters in the water cabinet Cleaning the fine, flat and micro-fine filtersCleaning the filters in the water inlet Drying unit TA cleaning and care Changing the Coarse FilterExchanging the S-class particle filter Correcting minor faults Faults/Possible CausesMachine does not start Installation Important for machines with DHK steam condensorPosition and secure the machine Cover plate worktop protection To remove service panel and cover plate Electrical connectionElectrical connection Plumbing Connection to the water inletAD connection to purified water, pressurised, 1.5 10 bar Connection to purified water non- pressurised 0 1.5 barDrainage Ventilation of the wash cabinet at rearCaring for the environment Disposal of the packing materialDisposal of your old machine Technical Data Noise emission in dB a