Miele G 7783 CD 1a. Cold water connection, 1b. Hot water connection, 1c. AD water connection

Page 31

Switching the machine on and off

The following special functions can be programmed where appropriate:

1.Setting water inlet to level plus time control instead of timed inlet (60 secs).

If the inlet water pressure is lower than

2.5bar, too little water will flow into the wash cabinet. By selecting level plus time control flow, more water will flow into the wash cabinet, if there is an inlet water pressure between 1 and 2.5 bar.

The setting is adjusted separately for cold, hot and AD-water.

Switch off the machine.

1a. Cold water connection

Press T1 and c at the same time, hold them in and also swtich on the machine with "I-0".

The current programme status "P..." appears in the display.

Press F. "10" or "11" will appear in the display.

"10" = Cold water connection time control (60 secs)

"11" = Cold water connection level plus time control

Press c to change from "10" to "11" or vice versa.

Press h. "SP" appears.

Press h again. The change has been recorded and the display field clears.

1b. Hot water connection

Switch off the machine.

Press T1 and c at the same time, hold them in and also switch on the machine with "I-0".

The current programme status "P..." appears in the display.

Press E. "20" or "21" will appear in the display.

"20" = Hot water connection time control (60 secs).

"21" = Hot water connection level plus time control

Press c to change from "20" to "21" or vice versa.

Press h. "SP" appears.

Press h again. The change has been recorded and the display field clears.

1c. AD water connection

Switch off the machine.

Press T1 and c at the same time, hold them in and also switch on the machine with "I-0". The current pro- gramme status "P..." appears in the display.

Press D. "30" or "31" will appear in the display.

"30" = AD water inflow time control (60 secs)

"31" = AD water inflow level plus time control.

Press c to change from "30" to "31" or vice versa.

27

Image 31
Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Disposal of an old machine AccessoriesAvailable at extra cost Description of the machineSetting the WaterSoftener Setting the water softenerReactivating the water softener, see To open the door a Opening and closing the doorTo close the door Loading the machine Applications and loadingRemoving excess soils Loading example 109 Top basket frame can take various inserts106 To adjust the top basket Adjusting the top basketRefilling with rinsing agent Setting the dosageRinsing agent Adding Rinsing agentAdding neutralising agent Adding neutralising agent and liquid detergentAdding detergents Venting the liquid dispensing system Venting the liquid dispensing system / MaintenanceChecking the dispensing system Adding powder detergent Adding detergent Programme B, and when using O-175 or a pipette plateProgramme selection = Cold Programme chartInstructions for the operator 7783 CDPage Page Accessories 93C 70C Programme Changes Switching the machine on and offSelecting a programme Selecting an additional pro- grammeSwitching the machine on and off Switching off Programme sequence indicatorInterrupting a programme 1b. Hot water connection 1a. Cold water connection1c. AD water connection Programming special functions Filling the salt container Reactivating the water softenerPosition the salt container as follows Switch on the machineCleaning the fine, flat and micro-fine filters Cleaning and careCleaning the filters in the water cabinet Cleaning the coarse filterCleaning the filters in the water inlet Changing the Coarse Filter Drying unit TA cleaning and careExchanging the S-class particle filter Faults/Possible Causes Correcting minor faultsMachine does not start Important for machines with DHK steam condensor InstallationPosition and secure the machine Cover plate worktop protection Electrical connection To remove service panel and cover plateElectrical connection Connection to the water inlet PlumbingConnection to purified water non- pressurised 0 1.5 bar AD connection to purified water, pressurised, 1.5 10 barVentilation of the wash cabinet at rear DrainageDisposal of the packing material Caring for the environmentDisposal of your old machine Noise emission in dB a Technical Data