Miele G 7783 CD operating instructions Drainage, Ventilation of the wash cabinet at rear

Page 45

Plumbing

Drainage

The drainage system is fitted with a non-return valve which prevents dirty water from flowing back into the ma- chine via the drain hose.

The machine should preferably be connected to a separate drainage system on site. If no separate drain- age system is available, seek profes- sional advice.

The machine is supplied with flexible drain hoses with an internal diameter of 22 mm and approx. 1.5 m long.

The drain hose must not be short- ened.

Hose clamps for connection are sup- plied.

Longer drain hoses (up to 4 m) are available if required. Contact the Miele Service Department.

The drainage system must not ex- ceed 4 metres and the drain pump has a maximum delivery head of 1 metre.

Ventilation of the wash cabinet at rear

For machines without DHK Steam con- densor, the rear ventilation of the wash cabinet should be connected to an on- site venting system.

Please refer to the Installation Instruc- tions provided.

41

Image 45

Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Disposal of an old machine AccessoriesAvailable at extra cost Description of the machineSetting the WaterSoftener Setting the water softenerReactivating the water softener, see Opening and closing the door To open the door aTo close the door Applications and loading Loading the machineRemoving excess soils Loading example Top basket frame can take various inserts 109106 To adjust the top basket Adjusting the top basketRinsing agent Setting the dosageAdding Rinsing agent Refilling with rinsing agentAdding neutralising agent and liquid detergent Adding neutralising agentAdding detergents Venting the liquid dispensing system / Maintenance Venting the liquid dispensing systemChecking the dispensing system Adding powder detergent Programme B, and when using O-175 or a pipette plate Adding detergentProgramme selection = Cold Programme chartInstructions for the operator 7783 CDPage Page Accessories 93C 70C Selecting a programme Switching the machine on and offSelecting an additional pro- gramme Programme ChangesSwitching the machine on and off Programme sequence indicator Switching offInterrupting a programme 1a. Cold water connection 1b. Hot water connection1c. AD water connection Programming special functions Filling the salt container Reactivating the water softenerPosition the salt container as follows Switch on the machineCleaning the filters in the water cabinet Cleaning and careCleaning the coarse filter Cleaning the fine, flat and micro-fine filtersCleaning the filters in the water inlet Drying unit TA cleaning and care Changing the Coarse FilterExchanging the S-class particle filter Correcting minor faults Faults/Possible CausesMachine does not start Installation Important for machines with DHK steam condensorPosition and secure the machine Cover plate worktop protection Electrical connection To remove service panel and cover plateElectrical connection Connection to the water inlet PlumbingConnection to purified water non- pressurised 0 1.5 bar AD connection to purified water, pressurised, 1.5 10 barVentilation of the wash cabinet at rear DrainageCaring for the environment Disposal of the packing materialDisposal of your old machine Noise emission in dB a Technical Data