Miele G 7783 CD Programme sequence indicator, Switching off, Interrupting a programme

Page 30

Switching the machine on and off

kREACTIVATION

(see "Reactivating water softener").

qDRAIN,

if for example the programme has been interrupted (n.b. observe preventive measures to avoid infection):

Press the I-0 button.

Press the q programme touchpad.

Press the "Start"-button h.

Programme sequence indicator

When a washing programme has been selected, the indicator lights in the dis- play will show the programme se- quence.

IPre-wash

lWash/possibly disinfecting

mInterim rinse

HFinal rinse

cDrying (additional programme)

DESIN Disinfection

(Only with the "B" SPECIAL pro- gramme maintaining parameters 90-93 °C - 10’, 90-93 °C - 25’, 85 °C - 10’, or 85 °C - 25’)

When part of a programme is com- plete, the corresponding indicator light goes out.

The programme is completed when no indicator lights are left on (expect for "DESIN" for the "B" SPECIAL pro- gramme) and when the "Start" h.light goes out. The display panel will show the total running time of the programme.

Switching off

Press the I-0 switch and let it spring out.

The machine can now be opened and unloaded.

Interrupting a programme

Once a programme is running it should only be interrupted in extreme cases, e.g.: when articles in the machine rattle or bump against each other and have to be rearranged.

The machine must then be switched off, the water drained and the pro- gramme restarted:

Switch the machine on and off again with the I-0 switch.

Select the "DRAIN" programme (Ad- ditional programmes)

On completion, open the door and replace the items securely and cor- rectly. Take any hygiene measures necessary against infection and wear protective gloves where necessary.

Replenish the powder detergent dis- penser in the door if necessary.

Close the door.

Reselect the programme.

26

Image 30
Contents CD Mielabor Contents Guide to the machine 10 11 12 13 Correct usage Page Page Accessories Disposal of an old machineDescription of the machine Available at extra costSetting the water softener Setting the WaterSoftenerReactivating the water softener, see Opening and closing the door To open the door aTo close the door Applications and loading Loading the machineRemoving excess soils Loading example Top basket frame can take various inserts 109106 Adjusting the top basket To adjust the top basketAdding Rinsing agent Setting the dosageRinsing agent Refilling with rinsing agentAdding neutralising agent and liquid detergent Adding neutralising agentAdding detergents Venting the liquid dispensing system / Maintenance Venting the liquid dispensing systemChecking the dispensing system Adding powder detergent Programme B, and when using O-175 or a pipette plate Adding detergentProgramme selection Programme chart = Cold7783 CD Instructions for the operatorPage Page Accessories 93C 70C Selecting an additional pro- gramme Switching the machine on and offSelecting a programme Programme ChangesSwitching the machine on and off Programme sequence indicator Switching offInterrupting a programme 1a. Cold water connection 1b. Hot water connection1c. AD water connection Programming special functions Reactivating the water softener Filling the salt containerSwitch on the machine Position the salt container as followsCleaning the coarse filter Cleaning and careCleaning the filters in the water cabinet Cleaning the fine, flat and micro-fine filtersCleaning the filters in the water inlet Drying unit TA cleaning and care Changing the Coarse FilterExchanging the S-class particle filter Correcting minor faults Faults/Possible CausesMachine does not start Installation Important for machines with DHK steam condensorPosition and secure the machine Cover plate worktop protection To remove service panel and cover plate Electrical connectionElectrical connection Plumbing Connection to the water inletAD connection to purified water, pressurised, 1.5 10 bar Connection to purified water non- pressurised 0 1.5 barDrainage Ventilation of the wash cabinet at rearCaring for the environment Disposal of the packing materialDisposal of your old machine Technical Data Noise emission in dB a