Miele T 7644 C operating instructions Options/Delay, Gentle, Buzzer

Page 17

Options/Delay

Gentle

Delicate fabrics (with the ￿symbol on the care label, such as acrylics) must be dried at lower temperatures for longer durations.

On some programs Gentle is permanently set and cannot be deselected.

Buzzer

At the end of the program a buzzer sounds at intervals, for a maximum of 1 hour.

A continuous warning tone for fault messages sounds whether the buzzer is on or off.

Delay

With the Delay option, you can select a later program start time. Program start can be delayed by 30 minutes up to a maximum of 24 hours. This enables you, for instance, to take advantage of night electricity rates.

After program selection:

￿Repeatedly press the Delay button until the required duration appears in the display.

The Delay indicator light flashes.

Times of

up to I0^ are selected in 30-minute steps,

more than I0^ in one-hour steps.

If you keep the Delay button pressed in, the time will continue to increase up to 24^.

Starting

￿Press the Start/Stop button.

– The Delay indicator light comes on.

The Delay counts down to program start as follows:

More than I0^, in whole hours.

Less than I0^, in minutes.

The drum will turn briefly every hour to prevent creasing.

Canceling / altering Delay

￿Press the Start/Stop button. The Delay is cancelled.

￿Repeatedly press the Delay button until the required duration appears in the display.

￿Press the Start/Stop button.

The Delay resumes from the beginning.

Adding laundry

You can add laundry while the Delay is still counting down:

￿Switch off the dryer.

￿Open the door and add the laundry.

￿Close the door and switch on the dryer.

17

Image 17
Contents Operating Instructions For condenser tumble dryer T 7644 C Disposal of packing material Caring for the environmentDisposing of your old appliance Saving energyContents Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyAccessories Description Main FeaturesOperating the dryer Dear Customer Function of Miele condenser dryerLaundry care anti-crease action and roll-up prevention To do all this, the dryer is equipped with systemsOperating the dryer Fault indicator / Optical interfaceControl panel DisplayProgrammable functions DelayProgram duration/ Estimated time remaining Laundry care Care symbolsDrying tips DryingLaundry care Brief instructions Proper dryingPreparing the laundry Turn on the dryerDryness level selection in programs Extra options/Select DelaySelect program End of program Remove laundry Starting the programBefore the end of a program Delay Options/DelayGentle BuzzerNormal Extra dry, Normal Program OverviewHand iron, Rotary iron Wrinkle-free Extra dry, Normal, Hand ironSmoothing WoolensExpress Normal, Hand iron Dress shirts Normal, Hand ironTimed warm Timed coldChanging the program sequence Switching over from a running programLoading or removing laundry Time remainingDeactivating the lock Electronic lockActivating the lock Emptying the condensed water container Cleaning and careCleaning without water Cleaning the lint filtration componentsCleaning with water Cleaning the dryerRemoving the condenser unit Cleaning the condenser heat exchanger unitChecking the condenser unit Handle of the unit must be on top, the locking lever down Replacing the condenser unitWhat to do, if . . . ? Trouble shootingTest and fault messages Canceling test Problem Cause SolutionCanceling the fault Container indicator lightOther problems Cleaned Problem Cause Solution Water runs fromDryer after Condenser has beenWhen switched on Start and the indicatorCold programs will not Lights for these programsReplacing the light bulb Program updates Customer serviceWarranty conditions and warranty period Optional accessoriesFront view Installation and connectionWasher-dryer stack Rear view Installation siteCarrying the dryer to the installation site Leveling the dryer Before transport at a later date Ventilating the installation areaArranging the drain hose Draining condensed water externallyGeneral Hooking up the drain hose in sink or floor drain Special installation conditions requiring a non-return valveInstallation and connection Electrical connections Technical data Programmable functions for changing Standard values Extending the range of drying levels Programmable functionsFor programming and saving in memory, follow steps to Adjusting buzzer volumeBuzzer normal default setting Buzzer loud Memory No Memory default settingSet memory function Extending cooldown time Change function of Filter/Vent indication Default settingNo Keypad tone default setting Keypad tone on Adjust keypad toneImportant condition Changing water conductivity settingDefault setting Lower conductivity setting Page Page Page Alteration rights reserved Nr 323 260