Miele T 7644 C operating instructions Other problems

			Trouble shooting
Other problems
Problem	Cause	Solution
The drying	Please check all possible causes and switch the dryer
process goes on	off and then on again.
too long or even	Insufficient ventilation,	Open the door or window, to
switches off.
	perhaps because the	prevent room temperature
Even after the lint	installation space is too	from rising.
screen is	small. As a result, room
cleaned, the	temperature may rise.
Filter/Vent	The ventilation inlets beneath	–	Remove the blocking
indicator come
	the door are closed.		objects.
on.
	Lint screens are plugged	–	Remove the lint.
	with lint or have been put	–	Lint screens must be dry.
	back wet after cleaning.
	Detergent residues, hair and	Inspect and clean the
	fine lint may block the	condenser from time to time.
	condenser.
	Laundry was insufficiently	In future, spin textiles in the
	spun.	washer at a higher rpm.
	The dryer is overloaded.	Verify the maximum load for
		each drying program.
	Metal components such as	– In future, open the zippers.
	zippers have prevented the	If the problem recurs, in
	moisture level of the laundry	future dry garments with long
	from being determined	zippers using the Warm air
	accurately.	program.
The laundry was	The load consists of various	– Re-dry with warm air.
not satisfactorily	fabrics.	– Next time, select a suitable
dried.			program.

31