Changing the program sequence
Switching over from a running program
As a protection against unintentional changes, program selection is no longer possible.
To be able to choose a new program, you must cancel the current program.
-Canceling and selecting a new program
Press the Start/Stop button.
The load will be cooled down for a few minutes, until a specific drying time and temperature have been reached.
If you press the Start/Stop button again, the drum stops, End appears in the display.
Switch the dryer off.
Then, switch it on again.
Select and start a new program im- mediately.
-Interrupting a program and removing laundry
See below: "Loading or removing laundry".
Turn the dryer off after closing the door.
Loading or removing laundry
Press the Door button.
Open the door.
Danger of burning:
Do not touch the back of the drum when adding or removing items. Temperatures in the drum area can be high.
Add or remove laundry as needed.
Close the door.
Press the Start/Stop button.
Time remaining
When the program sequence is changed, the time remaining as shown by the display may differ from the actual drying time.
21