Miele T 7644 C This dryer is intended for residential use only, Grounding Instructions

Page 6

IMPORTANT SAFETY INSTRUCTIONS

–items that have been previously cleaned, washed, soaked or spotted with gasoline, dry-cleaning solvents or other flammable or explosive substances. They may give off vapors that could ignite or explode.

–items treated with flammable cleaning agents or items containing acetone, alcohol, petrol, stain remover, wax or chemicals from buffing, etc.

–items which have been splashed with hair spray, nail polish remover, etc.

When washing heavily soiled items ensure that sufficient detergent is used with a high temperature. If in doubt wash the item several times.

–items containing foam rubber or similarly textured rubber-like materials.

–items with padding or filling (e.g. pillows or jackets) which have been damaged. Loose filling could catch fire.

￿WARNING – Never stop a tumble

dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

￿Allow the dryer to complete each stage of the program selected, including the cooling down phase. This will ensure that the items being removed are not too hot to handle

￿Clean the lint filter and lint screens before or after each load.

￿Keep the area around the air intake (toe kick) and adjacent surrounding areas free from lint, dust and dirt.

￿The interior of the machine should be cleaned periodically by qualified personnel.

This dryer is intended for residential use only!

￿GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

￿WARNING – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Contact a qualified electrician if you are in doubt as to whether the appliance is properly grounded.

￿Do not modify the plug provided with the appliance: if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

￿A faulty power cord must be replaced by a genuine Miele power cord.

￿Do not use the dryer without lint screens or with damaged lint screens.

￿Lint screens must be cleaned regularly!

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operating Instructions For condenser tumble dryer T 7644 C Disposing of your old appliance Caring for the environmentDisposal of packing material Saving energyContents Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsAccessories Operating the dryer Dear Customer Main FeaturesDescription Function of Miele condenser dryerTo do all this, the dryer is equipped with systems Laundry care anti-crease action and roll-up preventionControl panel Fault indicator / Optical interfaceOperating the dryer DisplayDelay Program duration/ Estimated time remainingProgrammable functions Drying tips Care symbolsLaundry care DryingLaundry care Preparing the laundry Proper dryingBrief instructions Turn on the dryerExtra options/Select Delay Select programDryness level selection in programs Starting the program Before the end of a programEnd of program Remove laundry Gentle Options/DelayDelay BuzzerHand iron, Rotary iron Program OverviewNormal Extra dry, Normal Wrinkle-free Extra dry, Normal, Hand ironExpress Normal, Hand iron WoolensSmoothing Dress shirts Normal, Hand ironTimed cold Timed warmLoading or removing laundry Switching over from a running programChanging the program sequence Time remainingElectronic lock Activating the lockDeactivating the lock Cleaning and care Emptying the condensed water containerCleaning the lint filtration components Cleaning without waterCleaning the dryer Cleaning with waterCleaning the condenser heat exchanger unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Handle of the unit must be on top, the locking lever downTrouble shooting Test and fault messagesWhat to do, if . . . ? Canceling the fault Problem Cause SolutionCanceling test Container indicator lightOther problems Dryer after Problem Cause Solution Water runs fromCleaned Condenser has beenCold programs will not Start and the indicatorWhen switched on Lights for these programsReplacing the light bulb Warranty conditions and warranty period Customer serviceProgram updates Optional accessoriesInstallation and connection Front viewRear view Installation site Carrying the dryer to the installation siteWasher-dryer stack Leveling the dryer Ventilating the installation area Before transport at a later dateDraining condensed water externally GeneralArranging the drain hose Special installation conditions requiring a non-return valve Hooking up the drain hose in sink or floor drainInstallation and connection Electrical connections Technical data Programmable functions for changing Standard values Programmable functions Extending the range of drying levelsAdjusting buzzer volume Buzzer normal default setting Buzzer loudFor programming and saving in memory, follow steps to No Memory default setting Set memory functionMemory Extending cooldown time Default setting Change function of Filter/Vent indicationAdjust keypad tone No Keypad tone default setting Keypad tone onChanging water conductivity setting Default setting Lower conductivity settingImportant condition Page Page Page Alteration rights reserved Nr 323 260
Top Page Image Contents