Miele T 7644 C operating instructions Timed cold, Timed warm

Page 20

Program Overview

Timed cold

Fabrics

– Any fabric needing airing.

Timed warm

Fabrics – Additional drying of multi-layered garments which dry unevenly owing to their design: e.g., jackets, pillows and voluminous fabrics.

	– Drying individual laundry items: e.g. bath towels, bathing suits, dish
	cloths.
Note	To start with, do not select the longest time. Determine the most
	suitable time by trial.
Tip:	Use Timed warm to remove or reduce unwanted odors from clean
	cotton clothing (duration: 1/2-1 hour). The freshening effect is
	reinforced if you moisten the clothing or use a sheet of fabric
	conditioner before airing them. Odor reduction will be less for
	synthetics.
Gentle	To be selected for delicate fabrics with the care symbol .

20

Image 20

Contents Operating Instructions For condenser tumble dryer T 7644 C Caring for the environment Disposal of packing materialDisposing of your old appliance Saving energyContents Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsAccessories Main Features DescriptionOperating the dryer Dear Customer Function of Miele condenser dryerTo do all this, the dryer is equipped with systems Laundry care anti-crease action and roll-up preventionFault indicator / Optical interface Operating the dryerControl panel DisplayProgrammable functions DelayProgram duration/ Estimated time remaining Care symbols Laundry careDrying tips DryingLaundry care Proper drying Brief instructionsPreparing the laundry Turn on the dryerDryness level selection in programs Extra options/Select DelaySelect program End of program Remove laundry Starting the programBefore the end of a program Options/Delay DelayGentle BuzzerProgram Overview Normal Extra dry, NormalHand iron, Rotary iron Wrinkle-free Extra dry, Normal, Hand ironWoolens SmoothingExpress Normal, Hand iron Dress shirts Normal, Hand ironTimed cold Timed warmSwitching over from a running program Changing the program sequenceLoading or removing laundry Time remainingDeactivating the lock Electronic lockActivating the lock Cleaning and care Emptying the condensed water containerCleaning the lint filtration components Cleaning without waterCleaning the dryer Cleaning with waterCleaning the condenser heat exchanger unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Handle of the unit must be on top, the locking lever downWhat to do, if . . . ? Trouble shootingTest and fault messages Problem Cause Solution Canceling testCanceling the fault Container indicator lightOther problems Problem Cause Solution Water runs from CleanedDryer after Condenser has beenStart and the indicator When switched onCold programs will not Lights for these programsReplacing the light bulb Customer service Program updatesWarranty conditions and warranty period Optional accessoriesInstallation and connection Front viewWasher-dryer stack Rear view Installation siteCarrying the dryer to the installation site Leveling the dryer Ventilating the installation area Before transport at a later dateArranging the drain hose Draining condensed water externallyGeneral Special installation conditions requiring a non-return valve Hooking up the drain hose in sink or floor drainInstallation and connection Electrical connections Technical data Programmable functions for changing Standard values Programmable functions Extending the range of drying levelsFor programming and saving in memory, follow steps to Adjusting buzzer volumeBuzzer normal default setting Buzzer loud Memory No Memory default settingSet memory function Extending cooldown time Default setting Change function of Filter/Vent indicationAdjust keypad tone No Keypad tone default setting Keypad tone onImportant condition Changing water conductivity settingDefault setting Lower conductivity setting Page Page Page Alteration rights reserved Nr 323 260