Miele T 7644 C Trouble shooting, What to do, if . . . ?, Test and fault messages

Trouble shooting

What to do, if . . . ?

You can remedy most problems yourself. In many cases you can save time and expense, since you will not have to call in customer service.

The following tips should help you locate and remedy the cause of a problem. However, please note the following:

￿Repairs to electrical appliances should only be carried out by qualified professionals. Work performed by unqualified persons can place the user at considerable risk.

Test and fault messages.

Problem	Cause	Solution
Cancelling a program	This is not a fault.	In future, dry individual
0 and Finish appear in	The electronics	laundry items with the
the display	recognizes that there is	warm air program.
The buzzer sounds.	no laundry in the drum	Cancelling test
	and cancels the program.	message:
	Drying of single or	– Open and close door
	already dried laundry
	items can also lead to
	program cancellation.
0-§appears in the	The lock function has	If you wish to dry, you
display.	been activated.	must disable the lock
Gentle indicator light		function (see "Electronic
flashes.		lock function").
Canceling a program	The cause is not immedi-	– Switch the dryer off
The buzzer sounds.	ately obvious.	and then on again.
Flashing display may		– Start a program.
show Cold air or Finish.		If program interruption
		and error message occur,
		a fault is present. Contact
		Miele customer service.

29