Miele T 7644 C Problem Cause Solution Water runs from, Dryer after, Condenser has been, Cleaned

Page 32

Trouble shooting

Problem

Cause

Solution

Water runs from the

– The condenser inner

– Verify that the internal

dryer after the

cover and/or the

cover and the

condenser has been

condenser have not

condenser are

cleaned:

been properly inserted

correctly and solidly

 

and latched.

seated.

 

– Lint is sticking in the

– Check their rubber

 

condenser housing

seals as well.

 

recess.

– Using a cloth, remove

 

 

all visible lint from the

 

 

heat exchanger recess.

Synthetic laundry items

Synthetics have a

Using a fabric softener in

are statically charged

tendency to static

the last rinse cycle can

after drying.

discharges.

reduce static charge

 

 

when drying.

There has been a lint

Drying releases fabric lint

Lint released is captured

buildup.

formed primarily from

in the lint screen and can

 

rubbing during wear but

be easily removed (see

 

also, in part, from

"Care and Cleaning").

 

washing. The stress on

 

 

fabrics in the dryer is

 

 

minimal in relation to their

 

 

strength.

 

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Operating Instructions For condenser tumble dryer T 7644 C Caring for the environment Disposal of packing materialDisposing of your old appliance Saving energyContents Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsAccessories Main Features DescriptionOperating the dryer Dear Customer Function of Miele condenser dryerTo do all this, the dryer is equipped with systems Laundry care anti-crease action and roll-up preventionFault indicator / Optical interface Operating the dryerControl panel DisplayProgrammable functions DelayProgram duration/ Estimated time remaining Care symbols Laundry careDrying tips DryingLaundry care Proper drying Brief instructionsPreparing the laundry Turn on the dryerDryness level selection in programs Extra options/Select DelaySelect program End of program Remove laundry Starting the programBefore the end of a program Options/Delay DelayGentle BuzzerProgram Overview Normal Extra dry, NormalHand iron, Rotary iron Wrinkle-free Extra dry, Normal, Hand ironWoolens SmoothingExpress Normal, Hand iron Dress shirts Normal, Hand ironTimed cold Timed warmSwitching over from a running program Changing the program sequenceLoading or removing laundry Time remainingDeactivating the lock Electronic lockActivating the lock Cleaning and care Emptying the condensed water containerCleaning the lint filtration components Cleaning without waterCleaning the dryer Cleaning with waterCleaning the condenser heat exchanger unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Handle of the unit must be on top, the locking lever downWhat to do, if . . . ? Trouble shootingTest and fault messages Problem Cause Solution Canceling testCanceling the fault Container indicator lightOther problems Problem Cause Solution Water runs from CleanedDryer after Condenser has beenStart and the indicator When switched onCold programs will not Lights for these programsReplacing the light bulb Customer service Program updatesWarranty conditions and warranty period Optional accessoriesInstallation and connection Front viewWasher-dryer stack Rear view Installation siteCarrying the dryer to the installation site Leveling the dryer Ventilating the installation area Before transport at a later dateArranging the drain hose Draining condensed water externallyGeneral Special installation conditions requiring a non-return valve Hooking up the drain hose in sink or floor drainInstallation and connection Electrical connections Technical data Programmable functions for changing Standard values Programmable functions Extending the range of drying levelsFor programming and saving in memory, follow steps to Adjusting buzzer volumeBuzzer normal default setting Buzzer loud Memory No Memory default settingSet memory function Extending cooldown time Default setting Change function of Filter/Vent indicationAdjust keypad tone No Keypad tone default setting Keypad tone onImportant condition Changing water conductivity settingDefault setting Lower conductivity setting Page Page Page Alteration rights reserved Nr 323 260
Top Page Image Contents