Miele T 7644 C Cold programs will not, Start and the indicator, Lights for these programs

Page 33

 

 

 

Trouble shooting

 

 

 

 

 

 

 

Problem

Cause

Solution

The Dress shirts,

The cause is not imme-

– Switch the dryer off and

Denim/Jeans, and Timed

diately obvious.

 

then on again.

cold programs will not

 

– Select one of the

start and the indicator

 

 

programs.

lights for these programs

 

– If the program will still

do not come on.

 

 

 

not start, there is a fault.

 

 

 

 

 

 

Contact Miele customer

 

 

 

service.

 

 

Meanwhile, use another

 

 

 

program.

The dryer will not start

The cause is not imme-

– Is the dryer switched

when switched on.

diately obvious.

 

on?

 

 

Is it plugged in?

 

 

Is the door closed?

 

 

Check fuses or circuit

 

 

 

breakers.

Drum lighting does not

The lighting switches off

Switch the dryer off and on

come on.

automatically to save

again.

 

energy.

 

 

 

The bulb may need

You can replace the bulb:

 

changing.

See the end of this section.

33

Image 33
Contents Operating Instructions For condenser tumble dryer T 7644 C Disposal of packing material Caring for the environmentDisposing of your old appliance Saving energyContents Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyAccessories Description Main FeaturesOperating the dryer Dear Customer Function of Miele condenser dryerLaundry care anti-crease action and roll-up prevention To do all this, the dryer is equipped with systemsOperating the dryer Fault indicator / Optical interfaceControl panel DisplayDelay Program duration/ Estimated time remainingProgrammable functions Laundry care Care symbolsDrying tips DryingLaundry care Brief instructions Proper dryingPreparing the laundry Turn on the dryerExtra options/Select Delay Select programDryness level selection in programs Starting the program Before the end of a programEnd of program Remove laundry Delay Options/DelayGentle BuzzerNormal Extra dry, Normal Program OverviewHand iron, Rotary iron Wrinkle-free Extra dry, Normal, Hand ironSmoothing WoolensExpress Normal, Hand iron Dress shirts Normal, Hand ironTimed warm Timed coldChanging the program sequence Switching over from a running programLoading or removing laundry Time remainingElectronic lock Activating the lockDeactivating the lock Emptying the condensed water container Cleaning and careCleaning without water Cleaning the lint filtration componentsCleaning with water Cleaning the dryerRemoving the condenser unit Cleaning the condenser heat exchanger unitChecking the condenser unit Handle of the unit must be on top, the locking lever down Replacing the condenser unitTrouble shooting Test and fault messagesWhat to do, if . . . ? Canceling test Problem Cause SolutionCanceling the fault Container indicator lightOther problems Cleaned Problem Cause Solution Water runs fromDryer after Condenser has beenWhen switched on Start and the indicatorCold programs will not Lights for these programsReplacing the light bulb Program updates Customer serviceWarranty conditions and warranty period Optional accessoriesFront view Installation and connectionRear view Installation site Carrying the dryer to the installation siteWasher-dryer stack Leveling the dryer Before transport at a later date Ventilating the installation areaDraining condensed water externally GeneralArranging the drain hose Hooking up the drain hose in sink or floor drain Special installation conditions requiring a non-return valveInstallation and connection Electrical connections Technical data Programmable functions for changing Standard values Extending the range of drying levels Programmable functionsAdjusting buzzer volume Buzzer normal default setting Buzzer loudFor programming and saving in memory, follow steps to No Memory default setting Set memory functionMemory Extending cooldown time Change function of Filter/Vent indication Default settingNo Keypad tone default setting Keypad tone on Adjust keypad toneChanging water conductivity setting Default setting Lower conductivity settingImportant condition Page Page Page Alteration rights reserved Nr 323 260