Miele T 7644 C Problem Cause Solution, Light goes on, Canceling test, Canceling the fault

Trouble shooting

Problem	Cause	Solution
Filter/Vent indicator	The indicator light shows	–	As a rule, it is sufficient
light goes on.	that the dryer is not		to clean the lint
	operating at its most		screens and door filter.
	efficient or economical.		Should that not be
	Possible causes:		sufficient, then check
	Blockage by lint or		all possible causes
	detergent residues.		listed under "The
			drying cycle goes on
			too long or even
			switches off."
		Canceling test
		message:
		–	Open and close door
		You can deactivate the
		Filter/Vent indicator light
		(see section on
		"Programmable
		functions").
Canceling a program	Possible causes and	Canceling the fault
Filter/Vent indicator	remedies are described	message:
light goes on.	above.	–	Open and close door
		–	Start a program.
		–	If the fault message
			comes back, call
			Customer Service.
Container indicator light	The condensed water	–	Empty the condensed
goes on.	container is full or there is		water container.
The buzzer sounds.	a kink in the drain hose.	–	Check the drain hose.
		Canceling test
		message:
		–	Open and close door

30