Miele T 7644 C operating instructions Electronic lock, Activating the lock, Deactivating the lock

Page 22

Electronic lock

The lock function protects your dryer against unauthorized use.

You can activate this function whenever you wish.

It locks the dryer's electronics. It can be turned on, but no program can be started.

–In such a case, the Gentle indicator light flashes and a key symbol 0-§ appears in the display.

The door may be opened at any time, as it is not locked.

Activating the lock

Precondition:

–The dryer is switched off.

–The door is closed.

Press the Gentle button and keep it pressed until Step .

Press the I-On/0-Offbutton in.

The Express indicator light comes on.

Slowly turn the program selector step by step through three positions clockwise.

The three program indicator lights must light up in succession.

Slowly turn the program selector step by step through three positions counterclockwise.

The three program indicator lights must light up in succession.

TheGentle indicator light flashes and the key symbol 0-§ appears in the display.

Release the Gentle button.

The lock function has been activated.

You may turn off the dryer.

Deactivating the lock

Precondition:

–The dryer is switched off.

–The door is closed.

The procedure is as for "Activating the Lock". Perform steps to.

At step the indicator light for the Gentle button no longer flashes and the 0-§ key symbol goes out.

The lock function has been deactivated.

22

Image 22

Contents Operating Instructions For condenser tumble dryer T 7644 C Disposing of your old appliance Caring for the environmentDisposal of packing material Saving energyContents Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsAccessories Operating the dryer Dear Customer Main FeaturesDescription Function of Miele condenser dryerTo do all this, the dryer is equipped with systems Laundry care anti-crease action and roll-up preventionControl panel Fault indicator / Optical interfaceOperating the dryer DisplayProgram duration/ Estimated time remaining DelayProgrammable functions Drying tips Care symbolsLaundry care DryingLaundry care Preparing the laundry Proper dryingBrief instructions Turn on the dryerSelect program Extra options/Select DelayDryness level selection in programs Before the end of a program Starting the programEnd of program Remove laundry Gentle Options/DelayDelay BuzzerHand iron, Rotary iron Program OverviewNormal Extra dry, Normal Wrinkle-free Extra dry, Normal, Hand ironExpress Normal, Hand iron WoolensSmoothing Dress shirts Normal, Hand ironTimed cold Timed warmLoading or removing laundry Switching over from a running programChanging the program sequence Time remainingActivating the lock Electronic lockDeactivating the lock Cleaning and care Emptying the condensed water containerCleaning the lint filtration components Cleaning without waterCleaning the dryer Cleaning with waterCleaning the condenser heat exchanger unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Handle of the unit must be on top, the locking lever downTest and fault messages Trouble shootingWhat to do, if . . . ? Canceling the fault Problem Cause SolutionCanceling test Container indicator lightOther problems Dryer after Problem Cause Solution Water runs fromCleaned Condenser has beenCold programs will not Start and the indicatorWhen switched on Lights for these programsReplacing the light bulb Warranty conditions and warranty period Customer serviceProgram updates Optional accessoriesInstallation and connection Front viewCarrying the dryer to the installation site Rear view Installation siteWasher-dryer stack Leveling the dryer Ventilating the installation area Before transport at a later dateGeneral Draining condensed water externallyArranging the drain hose Special installation conditions requiring a non-return valve Hooking up the drain hose in sink or floor drainInstallation and connection Electrical connections Technical data Programmable functions for changing Standard values Programmable functions Extending the range of drying levelsBuzzer normal default setting Buzzer loud Adjusting buzzer volumeFor programming and saving in memory, follow steps to Set memory function No Memory default settingMemory Extending cooldown time Default setting Change function of Filter/Vent indicationAdjust keypad tone No Keypad tone default setting Keypad tone onDefault setting Lower conductivity setting Changing water conductivity settingImportant condition Page Page Page Alteration rights reserved Nr 323 260