Bosch Appliances Nexxt DLX Leveling Procedure Electrical Connection, Each foot of the appliance

Leveling			procedure			Electrical			connection
Each foot of the appliance					or	GROUNDING			INSTRUCTIONS
pedestal must be placed firmly						on This appliance			must	be grounded.
the ground to prevent the washing In the event									of a malfunction or
machine from			wobbling.			breakdown,		grounding		will	reduce
Level	the	washing		machine	front tothe risk		of	electrical		shock	by pro6
back	and	side to		side with	the fourviding a		path		of least resistance for

qRelease screws using the 1/2" height6adjustable feet and a bubble the electric current. This appliance

wrench provided until they

can

level:

features a cord with an equipment6

be moved

freely.

d CAUTION

d

grounding conductor and a ground6

q completely

remove

transport

ing plug. The plug must be plugged

bolts (bolt,

spring,

washer

and

into

an appropriate outlet

which has

TO AVOID

RISK OF INJURIES

-

been

properly installed and

bushings) by reaching through

Take care when using the

grounded in accordance with all

the open washing machine door

wrench.

local

regulations and ordinances.

and pulling the drum slightly for6

ward to loosen, then pull

out

fromq Loosen

the

counter

nut1 using

d WARNING

d

the back.

the wrench

for levelling.

q If the bushings do not come outq when removing the screws, place screws back into the bushings q and carefully try again. It is im6 portant to do this with the screws, otherwise the bushings q will not come out properly.

Adjust the height by turning the		Improper connection of the
height6adjustable	foot2.	equipment		grounding		conductor
Tighten lock nut1	against the	may	result	in electric shock.
		Have	the	appliance checked by
housing.
		a qualified		electrician		or	service
Level machine as low as		technician		if you	are	in	doubt as
possible.		to whether		the	washer		has been
		properly grounded.
		Do not modify the plug provided
		with the appliance -				if	it will not fi
		the outlet, have a proper outlet
		installed by		a qualified electrician.

q Insert the		covers until they snap
in	completely.
Storing	the	transport bolts

Always keep the transport bolts for future transportation of the ap6 pliance (such as when moving out).

d WARNING d

The washing machine must only be connected to an individual branch circuit via a socket which has been properly installed and grounded.

The household electrical voltage must correspond to the voltage specification on the washing machine (rating plate, see page 27).

qFine tune the leveling by placing a small load in the machine, starting the machine in spin cycle and then leveling again.

Connection specifications			as well
as the	required	fuses are stipulated
on the appliance rating plate.
Volts	Hertz	Amperes	Watts
110-120	60	15	1350
			(max.)

qStore the transport bolts with the washer and bushing attached.

8