Cisco Systems Cisco Unity 3.1 To set up the PBXLink box, Select Configuration and press Enter

Page 16

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

Setting up the PBXLink Box

Note Ignore any unusual characters that may appear on the screen.

Step 14 On the Transfer menu, click Send File.

Step 15 In the Send File dialog box, under Filename, click Browse.

Step 16 Browse to the PBXLink box firmware upgrade file that you downloaded to your computer. Step 17 In the Send File dialog box, under Protocol, click Xmodem.

Step 18 Click Send.

Step 19 When the firmware upgrade is complete, exit HyperTerminal.

Step 20 Repeat Step 5 through Step 19 for all remaining PBXLink boxes.

Step 21 Connect the PBXLink boxes to the phone system and to the Cisco Unity server.

To set up the PBXLink box

Step 1 Select Configuration and press Enter.

Step 2 Select Integration and confirm that Stopped is selected.

Step 3 Select PBX Type, and select either Lucent 2 wire or Lucent 4 wire. If the setting you select is not the same as the setting that first appeared, the PBXLink box restarts.

Step 4 If the PBXLink box restarts, repeat Step 1, then skip to Step 5. Otherwise, continue with Step 5. Step 5 Select PBX Options and press Enter. The list of phone systems appears.

Step 6 Select Phone Set and enter either 8434D or 7434D, as you set up the digital port with the Add Station command.

Step 7 Select Voice Coding and select Mu Law for North America. Otherwise, select A Law.

Step 8 Select Analog Ports on A, enter the number of voice messaging ports that Port A monitors, and then press Enter.

Step 9 If you are setting up a PBXLink-48 box, select Analog Ports on B, enter the number of voice messaging ports that Port B monitors, and then press Enter. Otherwise, skip to the next step.

Step 10 Select Configure Port A, select Calls Only, and then press Enter.

Step 11 If you are setting up a PBXLink-48 box, select Configure Port B, select Calls Only, and then press Enter. Otherwise, skip to the next step.

Step 12 Select Prime Number, enter the pilot number that the phone system uses to call Cisco Unity, and then press Enter.

Step 13 Select Extension Length and enter the number of digits in the subscriber extensions. If the subscriber extensions have different lengths, enter the number of digits in the longest extension.

Step 14 Select Integration, select Started, and then press Enter.

If the system has two or more PBXLink digital ports, it is recommended that you balance the load among the PBXLink boxes by setting up the Port LTNs for random operation. Depending on the number of PBXLink digital ports your system uses, perform the appropriate procedure that follows.

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

16

OL-1846-06

 

 

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Integration Tasks Integration StepsPhone System RequirementsCisco Unity Server Configuration for 24 or Fewer Ports Configuration for 25 to 48 PortsConfiguration for 49 to 72 Ports Integration DescriptionPBXLink Box Connections Integration Features Number of Voice Messaging Ports to InstallProgramming the Avaya Definity/PBXLink Phone System Number of Voice Messaging Ports That Will Answer CallsTo program the Avaya Definity/PBXLink phone system Option SettingOption Button Assignment Setting Call-apprNormal Inspect Call-apprFeature Button Number Setting Abrdg-appr Extn 1st voice mail extensionAbrdg-appr Extn 2nd voice mail extension Abrdg-appr Extn 3rd voice mail extensionAbrdg-appr Extn 4th voice mail extension Abrdg-appr Extn 7th voice mail extensionEvery third remaining voice mail extension Abrdg-appr Extn 5th voice mail extensionCOR EnterVector Definition Options for Call Vector Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity To set up user phones To Update the PBXLink Box Firmware Setting up the PBXLink BoxClick PBXLinkFirmwareUpdate To set up the PBXLink box Select Configuration and press EnterTo set up the port LTNs for three PBXLink digital ports To set up the port LTNs for two PBXLink digital portsLTN Number Voice Messaging Port Value 0007 Configuring Cisco Unity for the Integration To confirm that the integration is enabledGo to System Licensing Licensed Features Switch Parameter Required SettingTesting the Integration To Set Up the Test ConfigurationTo Test an External Call with Release Transfer To Test an Internal Call with Release TransferTo Return Example Subscriber to the Default Settings To Set Up Supervised Transfer on Cisco UnityTo Test Supervised Transfer Integrating a Secondary Server for Cisco Unity Failover RequirementsTo Set Up the Secondary Server for Failover Setting Up the Secondary Server for FailoverIntegration Description Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewReinstall the TSP. See the To Reinstall the TSP procedure on Changing Cisco Unity Administrator Settings Go to System Switch IP Switch To specify switch settings for Cisco CallManagerTo Modify Voice Port Settings Page Changing the Number of Installed Ports To Remove the Existing TSPSetting Up Cisco Unity to Remap Extension Numbers About the Remapping FeatureTo Reinstall the TSP To Remap Extension Numbers Wildcard Syntax and ExamplesRule Original Number New Number To Set the Port Assignments in the Registry System Configuration Settings ConventionsConvention Description Ctrl-Alt-DeleteCisco.com Obtaining DocumentationDocumentation DVD Cisco Product Security Overview Documentation FeedbackOrdering Documentation Obtaining Technical Assistance Reporting Security Problems in Cisco ProductsCisco Technical Support Website Submitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information
Top Page Image Contents