Cisco Systems Cisco Unity 3.1 To program the Avaya Definity/PBXLink phone system, Option Setting

Page 7

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

Programming the Avaya Definity/PBXLink Phone System

Caution In programming the phone system, do not send calls to voice messaging ports in Cisco Unity that cannot answer calls (voice messaging ports that are not set to Answer Calls). For example, if a voice messaging port is set only to Dialout MWI, do not send calls to it.

To program the Avaya Definity/PBXLink phone system

Step 1 Use the Add Station <extension number> command (for example, Add Station 2001) to assign an extension number for each voice messaging port. Set the following options and press Enter.

The options available may vary depending on the software version of your phone system.

Table 1	Voice Messaging Port Options

Option		Setting

Extension		<the extension number of the voice messaging port>

Type		2500

Port		<the physical address of the port>

Lock Messages?		n

Test?		n

Name		VoiceMail 2001
		(The extension number must appear within the first 16
		characters.)

LWC Reception?		n

LWC Activation?		y

Redirect Notification?		n

Off Premise Station?		n

Coverage Msg Retrieval Permission?		n

Data Restriction?		y

Call Waiting Indication?		n

Distinctive Audible Alert?		n

Message Waiting Indicator?		n

Adjunct Supervision		y

Step 2 Use the Add Station <extension number> command (for example, Add Station 2999) to assign an extension number for each digital line to the PBXLink box. Set the digital line options (Table 2) and button assignments (Table 3).

Table 2

Digital Line Options for All Lines

Option

Extension

Type

Setting

<the extension number of the digital line>

•8434D

•7434D

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

	OL-1846-06	7

Image 7

Contents Integration Steps Integration TasksPhone System RequirementsCisco Unity Server Integration Description Configuration for 24 or Fewer PortsConfiguration for 25 to 48 Ports Configuration for 49 to 72 PortsPBXLink Box Connections Number of Voice Messaging Ports to Install Integration FeaturesNumber of Voice Messaging Ports That Will Answer Calls Programming the Avaya Definity/PBXLink Phone SystemTo program the Avaya Definity/PBXLink phone system Option SettingOption Inspect Call-appr Button Assignment SettingCall-appr NormalAbrdg-appr Extn 3rd voice mail extension Feature Button Number SettingAbrdg-appr Extn 1st voice mail extension Abrdg-appr Extn 2nd voice mail extensionAbrdg-appr Extn 5th voice mail extension Abrdg-appr Extn 4th voice mail extensionAbrdg-appr Extn 7th voice mail extension Every third remaining voice mail extensionEnter CORVector Definition Options for Call Vector Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity To set up user phones To Update the PBXLink Box Firmware Setting up the PBXLink BoxClick PBXLinkFirmwareUpdate Select Configuration and press Enter To set up the PBXLink boxTo set up the port LTNs for three PBXLink digital ports To set up the port LTNs for two PBXLink digital portsLTN Number Voice Messaging Port Value 0007 Switch Parameter Required Setting Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Go to System Licensing Licensed FeaturesTo Set Up the Test Configuration Testing the IntegrationTo Test an Internal Call with Release Transfer To Test an External Call with Release TransferTo Return Example Subscriber to the Default Settings To Set Up Supervised Transfer on Cisco UnityTo Test Supervised Transfer Requirements Integrating a Secondary Server for Cisco Unity FailoverTo Set Up the Secondary Server for Failover Setting Up the Secondary Server for FailoverIntegration Description Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledReinstall the TSP. See the To Reinstall the TSP procedure on Changing Cisco Unity Administrator Settings Go to System Switch IP Switch To specify switch settings for Cisco CallManagerTo Modify Voice Port Settings Page To Remove the Existing TSP Changing the Number of Installed PortsSetting Up Cisco Unity to Remap Extension Numbers About the Remapping FeatureTo Reinstall the TSP To Remap Extension Numbers Wildcard Syntax and ExamplesRule Original Number New Number To Set the Port Assignments in the Registry Ctrl-Alt-Delete System Configuration SettingsConventions Convention DescriptionCisco.com Obtaining DocumentationDocumentation DVD Cisco Product Security Overview Documentation FeedbackOrdering Documentation Obtaining Technical Assistance Reporting Security Problems in Cisco ProductsCisco Technical Support Website Definitions of Service Request Severity Submitting a Service RequestObtaining Additional Publications and Information