Cisco Systems Cisco Unity 3.1 manual Conventions, Convention Description, Ctrl-Alt-Delete

Page 35

Appendix: Documentation and Technical Assistance

Conventions

Step 5 Locate the subkey in which the value Service Provider Name is D41MT.TSP.

Step 6 In this subkey, in the Edit menu click New > DWORD Value. A new value appears in the subkey. Step 7 Enter the name DeviceID Lower Bound and press Enter.

Step 8 Double-click the DeviceID Lower Bound value. The Edit DWORD Value dialog box appears. Step 9 In the Value Data field, enter 1 and click OK.

Step 10 in the Edit menu click New > DWORD Value. A new value appears in the subkey.

Step 11 Enter the name DeviceID Upper Bound and press Enter.

Step 12 Double-click the DeviceID Upper Bound value. The Edit DWORD Value dialog box appears. Step 13 In the Value Data field, enter the number of Dialogic ports you want to assign and click OK. Step 14 Close the Registry Editor.

Step 15 For the settings to take effect, exit and restart the Cisco Unity software.

Appendix: Documentation and Technical

Assistance

Conventions

The Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1 uses the following conventions.

Table 26	Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1 Conventions

Convention		Description

boldfaced text		Boldfaced text is used for:
		• Key and button names. (Example: Click OK.)
		• Information that you enter. (Example: Enter Administrator in the User
		Name box.)

< >		Angle brackets are used around parameters for which you supply a value.
(angle brackets)		(Example: In the Command Prompt window, enter ping <IP address>.)
(angle brackets)

-		Hyphens separate keys that must be pressed simultaneously. (Example: Press
(hyphen)		Ctrl-Alt-Delete.)
(hyphen)

>		A right angle bracket is used to separate selections that you make:
(right angle		• On menus. (Example: On the Windows Start menu, click Settings > Control
bracket)		Panel > Phone and Modem Options.)
		• In the navigation bar of the Cisco Unity Administrator. (Example: Go to the
		System > Configuration > Settings page.)

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

	OL-1846-06	35

Image 35

Contents Integration Steps Integration TasksCisco Unity Server RequirementsPhone System Integration Description Configuration for 24 or Fewer PortsConfiguration for 25 to 48 Ports Configuration for 49 to 72 PortsPBXLink Box Connections Number of Voice Messaging Ports to Install Integration FeaturesNumber of Voice Messaging Ports That Will Answer Calls Programming the Avaya Definity/PBXLink Phone SystemOption Option SettingTo program the Avaya Definity/PBXLink phone system Inspect Call-appr Button Assignment SettingCall-appr NormalAbrdg-appr Extn 3rd voice mail extension Feature Button Number SettingAbrdg-appr Extn 1st voice mail extension Abrdg-appr Extn 2nd voice mail extensionAbrdg-appr Extn 5th voice mail extension Abrdg-appr Extn 4th voice mail extensionAbrdg-appr Extn 7th voice mail extension Every third remaining voice mail extensionEnter CORVector Definition Options for Call Vector Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity To set up user phones Click PBXLinkFirmwareUpdate Setting up the PBXLink BoxTo Update the PBXLink Box Firmware Select Configuration and press Enter To set up the PBXLink boxLTN Number Voice Messaging Port Value To set up the port LTNs for two PBXLink digital portsTo set up the port LTNs for three PBXLink digital ports 0007 Switch Parameter Required Setting Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Go to System Licensing Licensed FeaturesTo Set Up the Test Configuration Testing the IntegrationTo Test an Internal Call with Release Transfer To Test an External Call with Release TransferTo Test Supervised Transfer To Set Up Supervised Transfer on Cisco UnityTo Return Example Subscriber to the Default Settings Requirements Integrating a Secondary Server for Cisco Unity FailoverIntegration Description Setting Up the Secondary Server for FailoverTo Set Up the Secondary Server for Failover Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledReinstall the TSP. See the To Reinstall the TSP procedure on Changing Cisco Unity Administrator Settings To Modify Voice Port Settings To specify switch settings for Cisco CallManagerGo to System Switch IP Switch Page To Remove the Existing TSP Changing the Number of Installed PortsTo Reinstall the TSP About the Remapping FeatureSetting Up Cisco Unity to Remap Extension Numbers To Remap Extension Numbers Rule Original Number New Number Syntax and ExamplesWildcard To Set the Port Assignments in the Registry Ctrl-Alt-Delete System Configuration SettingsConventions Convention DescriptionDocumentation DVD Obtaining DocumentationCisco.com Ordering Documentation Documentation FeedbackCisco Product Security Overview Cisco Technical Support Website Reporting Security Problems in Cisco ProductsObtaining Technical Assistance Definitions of Service Request Severity Submitting a Service RequestObtaining Additional Publications and Information